Nodes
|
- PowerFlex R660/R760 (hyperconverged, storage-only, and compute-only)
- PowerFlex R6625/R7625 (compute-only)
- PowerFlex R650/R750 (hyperconverged, storage-only, and compute-only)
- PowerFlex R6525/R7525 (compute-only)
- PowerFlex R640/R740xd (hyperconverged, storage-only, and compute-only)
- PowerFlex R840 (hyperconverged and compute-only)
- PowerFlex R660/R650 (management controller)
- PowerFlex R660/R650 (PowerFlex file)
- PowerFlex R660/R650 (VMware NSX Edge node)
|
- PowerFlex R660/R760 (hyperconverged, storage-only, and compute-only)
- PowerFlex R6625/R7625 (compute-only)
- PowerFlex R650/R750 (hyperconverged, storage-only, and compute-only)
- PowerFlex R6525/R7525 (compute-only)
- PowerFlex R640/R740xd (hyperconverged, storage-only, and compute-only)
- PowerFlex R840 (hyperconverged and compute-only)
- PowerFlex R660/R650 (management controller)
- PowerFlex R660/R650 (PowerFlex file)
- PowerFlex R660/R650 (VMware NSX Edge node)
|
- PowerFlex R660/R760 (hyperconverged, storage-only, and compute-only)
- PowerFlex R6625/R7625 (compute-only)
- PowerFlex R650/R750 (hyperconverged, storage-only, and compute-only)
- PowerFlex R6525/R7525 (compute-only)
- PowerFlex R640/R740xd (hyperconverged, storage-only, and compute-only)
- PowerFlex R840 (hyperconverged and compute-only)
- PowerFlex R660/R650 (management controller)
- PowerFlex R660/R650 (PowerFlex file)
- PowerFlex R660/R650 (VMware NSX Edge node)
|
Operating system/hypervisor (for RCM 3.8.0.0)
|
- VMware ESXi-8.0 (management controller)
- VMware-VCSA-all-8.0.x (management controller)
- VMware-ESXi-8.0 (hyperconverged and compute-only)
- Embedded operating system based on SLES 15 SP4 (storage-only and compute-only)
PowerFlex Manager support for
PowerFlex rack with operating systems that are provided by customer is limited to installation only and no update.
|
- VMware ESXi-8.0 (management controller)
- VMware-VCSA-all-8.0.x (management controller)
- VMware-ESXi-8.0 (hyperconverged and compute-only)
- Embedded operating system 15 SP4) (storage-only and compute-only)
PowerFlex Manager support for
PowerFlex rack with operating systems that are provided by customer is limited to installation only and no update.
|
Not applicable
|
Operating system/hypervisor (for RCM 3.7.5.0)
|
- VMware ESXi-7.0U3 (management controller)
- VMware-VCSA-all-7.0 3 (management controller)
- VMware-ESXi-7.0U3 (hyperconverged and compute-only)
- Embedded operating system based on SLES 15 SP4 (storage-only and compute-only)
PowerFlex Manager support for
PowerFlex rack with operating systems that are provided by customer is limited to installation only and no update.
|
- VMware ESXi-7.0U3 (management controller)
- VMware-VCSA-all-7.0 3 (management controller)
- VMware-ESXi-7.0U3 (hyperconverged and compute-only)
- Embedded operating system based on SLES 15 SP4 (storage-only and compute-only)
PowerFlex Manager support for
PowerFlex rack with operating systems that are provided by customer is limited to installation only and no update.
|
Not applicable
|
Adapters
|
- NVIDIA ConnectX-6 LX
- NVIDIA ConnectX-6 DX
- NVIDIA ConnectX-5 OCP/PCIe
- NVIDIA ConnectX-4 rNDC
- Intel X710/I350 rNDC
- Broadcom 57414 V1 2x25 OCP
- Broadcom 57414 V2 2x25
- Broadcom 57414 V1 2x25
- Broadcom 57508 V1 2x100
|
Lifecycle mode when a supported adapter cannot be identified.
|
Not applicable
|
Networking
|
Managed mode requires a pair of the following server facing
Dell and Cisco switches:
The following switches are shipped and supported:
- Cisco Nexus 92348GC-X
- Cisco Nexus 93180YC-FX3
- Cisco Nexus 9336C-FX2
- Cisco Nexus 93240YC-FX2
- Cisco Nexus 9364C-GX
- Dell PowerSwitch 4148T
- Dell S5232F-ON
- Dell S4148F-ON
- Dell S5248F-ON
The following switches are supported but no longer shipped:
- Cisco Nexus 31108TC-V
- Cisco Nexus 3172TQ
- Cisco Nexus 93180YC-EX
- Cisco Nexus 93180YC-FX
- Cisco Nexus 9236C
- Cisco Nexus 3132
- Cisco Nexus 3164
- Cisco Nexus 9364C
PowerFlex Manager can monitor and update the accessible switches in managed mode.
PowerFlex Manager does not support monitoring and updating of the Cisco Nexus EPLD version.
|
Lifecycle mode when a supported switch cannot be identified or cannot be granted with write access, provided the network configuration does not modify the node configuration.
PowerFlex Manager can update only components with write access.
|
Not applicable
|
Storage
|
PowerFlex 4.5.2
|
PowerFlex 4.5.2
|
Not applicable
|
Security
|
CloudLink 8.1
|
CloudLink 8.1
|
Not applicable
|
RCM version
|
|
|
Not applicable
|