Dell EMC PMem 100 Series User's Guide

Events during runtime

• MEM0001 : Multibit memory errors detected on a memory device at location <location>.

  Recommended Action : Reinstall the memory component. If the problem persists, contact technical support.

• MEM0701 : Correctable memory error rate exceeded for <location>.

  Recommended Action : Reinstall the memory component. If the problem continues, contact support.

• MEM9022 : A Non-Critical event was detected on the Non-Volatile Dual In-line memory module (NVDIMM) device in the slot <location>.

  Recommended Action : If the issue persists, contact the service provider.

• MEM9040 : A Critical event was detected on the Non-Volatile Dual In-line memory module (NVDIMM) device in the slot <location>.

  Recommended Action : Remove and reinstall the Non-Volatile Dual In-line memory module (NVDIMM) device. If the issue persists, contact the service provider. For information about removing and reinstalling the NVDIMM, see the system owner's manual on the support site.

• MEM9061: An Information-Only event was detected on the Non-Volatile Dual In-line memory module (NVDIMM) device in the slot <location>. The NVDIMM is operating normally.

  Recommended Action: No response action is required.

• MEM9073 : Unable to update firmware for the NVDIMM identified in the message.

  Recommended Action: Retry the operation. If the issue persists, replace the NVDIMM, or contact your service provider. It is also recommended that the system is upgraded to the latest BIOS.