Network Settings
screen details
The Network Settings screen details are explained as follows:
About this task
Option
Description
UEFI PXE Settings
Enables you to control the configuration of the UEFI PXE
device.
PXE Device n (n = 1 to
4)
Enables or disables the device. When enabled, a UEFI
PXE boot option is created for the device.
PXE Device n Settings (n
= 1 to 4)
Enables you to control the configuration of the PXE
device.Table 1. PXE Device n Settings
details This tables describes the UEFI PXE Device n Settings screen details. Option Description Interface Specifies NIC interface used for the PXE device. Protocol Specifies Protocol used for PXE device. This option
is set to IPv4 or IPv6 . This option is set to IPv4 by default. Vlan Enables Vlan for PXE device. This option
is set to Enable or Disable . This option is set to Disable by default. Vlan ID Shows the Vlan ID for the PXE device Vlan Priority Shows the Vlan Priority for the PXE device.
UEFI HTTP Settings
Enables you to control the configuration of the UEFI HTTP
device
HTTP Device n (n = 1 to
4)
Enables or disables the device. When enabled, a UEFI
HTTP boot option is created for the device.
HTTP Device n Settings (n
= 1 to 4)
Enables you to control the configuration of the HTTP
device.Table 2. HTTP Device n Settings
details This tables describes the UEFI HTTP Device n Settings screen details. Option Description Interface Specifies NIC interface used for the HTTP device. Protocol Specifies Protocol used for HTTP device. This option
is set to IPv4 or IPv6 . This option is set to IPv4 by default. Vlan Enables Vlan for HTTP device. This option
is set to Enable or Disable . This option is set to Disable by default. Vlan ID Shows the Vlan ID for the HTTP device Vlan Priority Shows the Vlan Priority for the HTTP device. URi Obtain URi from the DHCP server if not specified
UEFI iSCSI Settings
Enables you to control the configuration of the iSCSI
device.Table 3. UEFI iSCSI Settings screen details This tables describes the UEFI iSCSI Settings screen details. Option Description iSCSI Initiator Name Specifies the name of the iSCSI initiator in IQN format. iSCSI Device1 Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for the iSCSI device automatically. This is set to Disabled by default. iSCSI Device1 Settings Enables you to control the configuration of the iSCSI device.
Data is not available for the Topic
All fields are required unless marked otherwise.
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.
Thank you for your feedback.