Dell EMC PowerEdge R6525 Technical Specifications

PDF

PSU specifications

The PowerEdge R6525 system supports up to two AC or DC power supply units (PSUs).

WARNING Instructions for the qualified electricians only:

System using -(48-60) V DC or 240 V DC power supplies are intended for restricted access locations in accordance with Articles 110-5, 110-6, 110-11, 110-14, and 110-17 of the National Electrical Code, American National Standards Institute (ANSI)/National Fire Protection Association (NFPA) 70.

240 V DC power supplies shall be connected to the 240 V DC outlet from certified power distribution units if applicable in country of use.

Power supply cords/jumper cords and the associated plugs/inlets/connectors shall have appropriate electrical ratings referencing the rating label on the system when used for connection.

Table 1. PowerEdge R6525 PSU specificationsThis table describes PSU specifications.
PSU	Class (AC only)	Heat dissipation (maximum)	Frequency	Voltage	Current
800 W Mixed Mode	Platinum	3000 BTU/hr	50/60 Hz	100 -240 V AC	9.2 - 4.7 A
800 W Mixed Mode	N/A	3000 BTU/hr	DC	240 V DC	3.8 A
1100 W Mixed Mode	Titanium	4100 BTU/hr	50/60 Hz	100–240 V AC	12 A-6.3 A (X2)
1100 W Mixed Mode	N/A	4100 BTU/hr	DC	240 V DC	5.2 A DC
1100 W (-48Vdc)	N/A	4265 BTU/hr	DC	(-48)-(-60) V DC	27 A
1400 W Mixed Mode	Platinum	5250 BTU/hr	50/60 Hz	100 - 240 V AC	12 - 8 A AC
1400 W Mixed Mode	N/A	5250 BTU/hr	DC	240 V DC	6.6 A DC

NOTE When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system power consumption with the Dell Energy Smart Solution Advisor available at Dell.com/ESSA.

Welcome

Welcome to Dell

Dell EMC PowerEdge R6525 Technical Specifications

PSU specifications

Rate this content