Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Technologies Boot Optimized Storage Solution-S2 User's Guide

Technical specifications of BOSS-S2 card

The following table lists the BOSS-S2 card technical specifications:

Table 1. Technical specifications of BOSS-S2 cardThis table describes the technical specifications of BOSS-S2 card.
Function or feature BOSS-S2 card
Hot–plug of M.2 drives Yes
LED activity of M.2 drives Yes
Controlled firmware update Yes
RAID levels RAID 1 and Non–RAID
Stripe size Supports default 64 K stripe size only
Battery backup unit No
Non–volatile cache No
Virtual disk cache function Write through
Maximum number of virtual disks 1
Maximum number of drives supported 2
Support for non–RAID disks Yes (supports up to two disks)
Drive types 6 Gbps M.2 SATA SSDs x 2
PCIe support Gen 2
Disk cache policy Drive default
TRIM Non–RAID mode
Stripe size supported 64 K
Configuration (HII) Yes
Full initialization No
Fast initialization Yes
NOTE:By default, fast initialization is performed when you create a virtual disk.
Background initialization No
RAID 0 No
RAID 1 Yes
Single non–RAID Yes
Dual non–RAID Yes
Degraded RAID 1 and non–RAID No
Foreign import Yes
Consistency check No
Patrol read No
Load balance N/A
Rebuild Yes (Only Auto–rebuild)
Hot spare No
Change rebuild priority/rate No
Virtual disk write back/read ahead cache No
NOTE:BOSS-S2 controller does not support controller cache.
Battery support N/A
NOTE:BOSS-S2 controller does not support a battery.
Non–RAID disk cache policy Yes
NOTE:OS controlled or device defaults.
SMART Info Yes
NOTE:Use the BOSS-S2 CLI to retrieve the SMART information from the drives.
Physical disk hot–plug Yes
Virtual disk expansion No
Virtual disk slicing No
Virtual disk migration Yes
NOTE:On new controller, virtual disk must be imported from HII before presented to OS.
Split mirror No
NOTE: System required to shutdown and migrate one physical disk to another system and continue rebuild.
Non–RAID migration Yes
BIOS configuration utility (Ctrl-M) Yes
Add on driver for data path (OS device driver) No
NOTE:Console Windows driver or Linux library is required for management purposes only.
4 K native drive support No
TRIM and UNMAP virtual disk No
TRIM and UNMAP non–RAID physical disk Yes
Self-encrypting drives (SED) support No
Cryptographic erase (sanitize) Yes
NOTE:If drive supports SANITIZE Crypto Erase. No other encryption support from controller or drive.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\