- Notes, cautions, and warnings
- Dell Technologies Boot Optimized Storage Solution-S2
- Applications supported by BOSS-S2
- Update the BOSS-S2 firmware version
- Features of BOSS-S2
- Install and remove a BOSS-S2 card
- Driver support for BOSS-S2
- BOSS-S2 UEFI configuration utility
- Enter the BOSS-S2 UEFI configuration utility
- Exit the BOSS-S2 UEFI configuration utility
- Navigate to BOSS-S2 configuration utility
- Physical or virtual disk information
- Create a virtual disk
- Delete a virtual disk
- Recover or rebuild a degraded virtual drive
- Erase physical disk data
- View RAID controller information
- Manage BOSS-S2 using CLI commands
- Troubleshooting
- Importing the BOSS ESXi CLI offline bundle may fail in VSphere Lifecycle Manager
- BOSS ESXi CLI package fails when upgrading from Dell EMC customized versions of 6.7.x to version 7.0
- M.2 drive firmware update from iDRAC fails on unconfigured drives with an existing adapter key on the BOSS-S2 controller
- Unconfigured drives in the BOSS-S2 controller is unavailable for operating system installation with an existing adapter key
- The ROM version for BOSS is reported as firmware version in IDRAC interface
- Unable to update the M.2 drive firmware by using iDRAC or Lifecycle Controller
- BOSS-S2 CLI displays No Adapter Found error in Linux
- LC log displays fan unavailability error
- Physical disk size is not updated on iDRAC when CSIOR is disabled
- Physical disk or virtual disk is indicated as missing on iDRAC when CSIOR is disabled
- The Back Ground Activity (BGA) task process in HII does not report real-time status
- Virtual disk related events are repeatedly generated in BOSS-S2 and OMSS
- Characters are limited when entering a virtual drive name
- VMFS datastore is disabled from YX5X of PowerEdge systems that are shipped with VMware ESXi installed on BOSS-S2
- One or more physical disks are not detected by the operating system
- Virtual disk is not detected by the operating system
- An installed drive is not listed in the BOSS-S2 Configuration Utility
- The BOSS-S2 card is not presented to the PowerEdge server
- Unable to boot to M.2 drive installed in slot 1
- Unsupported commands, options, and features are displayed by BOSS-S2 CLI with VMware CLI utility
- Unable to deploy ESXi on RAID 1 of BOSS-S2
- Getting help
- Documentation resources
Dell Technologies Boot Optimized Storage Solution-S2 User's Guide
One or more physical disks are not detected by the operating system
- Issue:
- One or more physical disks are not detected by the operating system.
- Probable Cause:
- A physical disk will not be presented to the operating system in the following scenarios:
- There is RAID metadata on the physical disk and no RAID metadata on the controller.
- The BOSS-S2 controller has RAID metadata on it and the physical disk does not have the RAID metadata on it.
- Corrective Action:
- If the RAID metadata is on the controller, follow the steps listed in
Clear Controller Configuration.
If the RAID metadata is on the physical disk, follow the steps specified in Erase physical disk.
Alternatively, if you want to keep the RAID drive, refer to Virtual Disk Not visible to Operating System
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\