Dell Technologies Boot Optimized Storage Solution-S2 User's Guide

PDF

BOSS-S2 CLI commands supported on PowerEdge servers

The following table lists the supported BOSS-S2 command line interface (CLI) commands. For more information about the commands, type > help.

NOTE:The BOSS-S2 CLI utility only supports the following commands:

Table 1. Supported CLI commandsThis table describes the supported CLI commands.
CLI commands	Description	Windows usage	Linux/VMware usage
info -o hba	Display BOSS-S2 controller information.	mvsetup info -o hba	./mvcli info -o hba
info -o vd	Display virtual drive information.	mvsetup info -o vd	./mvcli info -o vd
info -o pd	Display physical drive information.	mvsetup info -o pd	./mvcli info -o pd
smart -p <PD_ID>	Display SMART information of physical drive.	mvsetup smart -p 0	./mvcli smart -p 0
event	Display controller events.	mvsetup event	./mvcli event
help	Details help for all commands or for only one command.	mvsetup help info	./mvcli help

NOTE:SMART reports the health status of the M.2 disks. See the SMART status return after the command is executed.

NOTE:There might be inconsistency in the events that are listed in BOSS CLI and other management interfaces that include Dell EMC Open Manage Storage Services.