Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell PowerEdge R630 Owner's Manual

PDF

Three-riser chassis

NOTE This is applicable for eight x 2.5-inch, 10 x 2.5-inch, or 24 x 1.8-inch hard drive chassis.
Figure 1. Back panel features (three PCIe expansion cards)
This figure shows the back panel features of PowerEdge R630, three PCIe expansion cards.
  1. System identification button
  2. System identification connector
  3. iDRAC8 Enterprise port
  4. LP PCIe expansion card slot (riser 1)
  5. Serial connector
  6. LP PCIe expansion card slot (riser 2)
  7. Video connector
  8. USB port (2)
  9. LP PCIe expansion card slot (riser 3)
  10. Ethernet connectors (4)
  11. Power supply (PSU1)
  12. Power supply (PSU2)
Table 1. Back panel features (three PCIe expansion cards)Item 1 is the system identification button on the front and back panels, that can be used to locate a particular system within a rack. When one of these buttons is pressed, the LCD panel on the front and the system status indicator on the back flashes until one of the buttons is pressed again. Press to toggle the system ID on and off. If the system stops responding during POST, press and hold the system ID button for more than five seconds to enter BIOS progress mode. To reset iDRAC (if not disabled in F2 iDRAC setup) press and hold the button for more than 15 seconds. Item 2 is System identification connector, that allows you to connect the optional system status indicator assembly through the optional cable management arm. Item 3 is iDRAC8 Enterprise port. It is a dedicated management port. The port is available for use only if the iDRAC8 Enterprise license is installed on your system. Item 4 is LP PCIe expansion card slot (riser 1), that allows you to connect a low profile LP PCIe expansion card. Item 5 is serial connector, that allows you to connect a serial device to the system. Item 6 is LP PCIe expansion card slot (riser 2), that allows you to connect a low profile LP PCIe expansion card. Item 7 is video connector, that allows you to connect a VGA display to the system. Item 8 is USB port (2) that allows you to connect USB devices to the system. The ports are USB 3.0-compliant. Item 9 is LP PCIe expansion card slot (riser 3) that you to connect a LP PCIe expansion card. Item 10 are the Ethernet connectors (4) that has four integrated 10/100/1000 Mbps NIC connectors or four integrated connectors and two integrated 10/100/1000 Mbps NIC connectors, two integrated 100 Mbps/1 Gbps/10 Gbps SFP+ connectors. Item 11 and 12 are power supply units (PSU1 and (PSU2) that has AC PSU up to 495 W, 750 W, or 1100 W and DC PSU up to 750 W or 1100 W.
ItemIndicator, Button, or ConnectorIconDescription
1System identification buttonsystem identification iconThe identification buttons on the front and back panels can be used to locate a particular system within a rack.
10/24 hard drive system
When one of these buttons is pressed, the system status indicator on the back flashes until one of the buttons is pressed again.
Eight hard drive system
When one of these buttons is pressed, the LCD panel on the front and the system status indicator on the back flashes until one of the buttons is pressed again.

Press to toggle the system ID on and off. If the system stops responding during POST, press and hold the system ID button for more than five seconds to enter BIOS progress mode.

To reset iDRAC (if not disabled in F2 iDRAC setup) press and hold for more than 15 seconds.

2System identification connectorEnables you to connect the optional system status indicator assembly through the optional cable management arm.
3iDRAC8 Enterprise portiDRAC8 Enterprise port iconDedicated management port.
NOTE The port is available for use only if the iDRAC8 Enterprise license is installed on your system.
4LP PCIe expansion card slot (riser 1)Enables you to connect a low profile LP PCIe expansion card. See the Expansion card installation guidelines section.
5Serial connectorserial connector iconEnables you to connect a serial device to the system.
6LP PCIe expansion card slot (riser 2)Enables you to connect a low profile LP PCIe expansion card. See the Expansion card installation guidelines section.
7Video connectorvideo connector iconEnables you to connect a VGA display to the system.
8USB port (2)USB port iconEnables you to connect USB devices to the system. The ports are USB 3.0-compliant.
9LP PCIe expansion card slot (riser 3)Enables you to connect a LP PCIe expansion card. See the Expansion card installation guidelines section.
10Ethernet connectors (4)Ethernet connector iconFour integrated 10/100/1000 Mbps NIC connectors

or

Four integrated connectors:
  • Two integrated 10/100/1000 Mbps NIC connectors
  • Two integrated 100 Mbps/1 Gbps/10 Gbps SFP+ connectors

or

  • Four 10 Gbps
11PSU1
  • Two 495 W, 750 W, or 1100 W AC power supply units (PSUs)

    Or

  • Two 1100 W DC PSUs

    Or

  • Two 750 W mixed mode PSUs
12PSU2
  • Two 495 W, 750 W, or 1100 W AC PSUs

    Or

  • Two 1100 W DC PSUs

    Or

  • Two 750 W mixed mode PSUs

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\