- Notes, cautions, and warnings
- Dell PowerEdge R630 system overview
- Documentation resources
- Technical specifications
- Initial system setup and configuration
- Pre-operating system management applications
- Options to manage the pre-operating system applications
- System Setup
- Viewing System Setup
- System Setup details
- System BIOS
- Viewing System BIOS
- System BIOS Settings details
- Boot Settings
- Network Settings
- System Security
- System Information
- Memory Settings
- Processor Settings
- SATA Settings
- Integrated Devices
- Serial Communication
- System Profile Settings
- Miscellaneous Settings
- iDRAC Settings utility
- Device Settings
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Front bezel (optional)
- System cover
- Inside the system
- Cooling shroud
- System memory
- Hard drives
- Removing a 2.5-inch hard drive blank
- Installing a 2.5-inch hard drive blank
- Removing a 1.8-inch hard drive blank
- Installing a 1.8-inch hard drive blank
- Removing a hot swappable hard drive or solid state drive
- Installing a hot swappable hard drive
- Removing a hard drive or a solid state drive from a hard drive carrier
- Installing a hot swappable hard drive into a hot swappable hard drive carrier
- Removing a 1.8-inch hard drive from a hard drive carrier
- Installing a 1.8-inch hard drive into a hard drive carrier
- Optical drive (optional)
- Cooling fans
- Internal USB memory key (optional)
- Expansion cards and expansion card riser
- SD vFlash card (optional)
- IDSDM
- Integrated storage controller card
- Network daughter card
- Processors and heat sinks
- Power supply units (PSU)
- System battery
- Hard drive backplane
- Control panel assembly
- Removing the control panel board–eight hard drive system
- Installing the control panel board–eight hard drive system
- Removing the control panel–eight hard drive system
- Installing the control panel–eight hard drive system
- Removing the control panel–10 hard drive and 24 hard drive system
- Installing the control panel–10 hard drive system and 24 hard drive system
- VGA module
- System board
- Trusted Platform Module
- Technology and Components
- Using system diagnostics
- Jumpers and connectors
- Troubleshooting your system
- Minimum configuration to POST
- Troubleshooting system startup failure
- Troubleshooting external connections
- Troubleshooting the video subsystem
- Troubleshooting a USB device
- Troubleshooting iDRAC Direct - USB XML configuration
- Troubleshooting iDRAC Direct - Laptop connection
- Troubleshooting a serial input and output device
- Troubleshooting a NIC
- Troubleshooting a wet system
- Troubleshooting a damaged system
- Troubleshooting the system battery
- Troubleshooting power supply units
- Troubleshooting cooling problems
- Troubleshooting cooling fans
- Troubleshooting system memory
- Troubleshooting an internal USB key
- Troubleshooting a micro SD card
- Troubleshooting an optical drive
- Troubleshooting a tape backup unit
- Troubleshooting a drive or SSD
- Troubleshooting a storage controller
- Troubleshooting expansion cards
- Troubleshooting processors
- Getting help
Dell PowerEdge R630 Owner's Manual
System board jumpers and connectors
| Item | Connector | Description |
|---|---|---|
| 1. | J_BP_SIG1 | Backplane signal connector 1 |
| 2. | J_PS2 | PSU 2 power connector |
| 3. | J_BP_SIG0 | Backplane signal connector 0 |
| 4. | J_SATA_CD | Optical drive SATA connector |
| 5. | J_SATA_TBU | SATA tape backup unit connector |
| 6. | J_BP0 | Backplane power connector |
| 7. | J_TBU | Tape backup unit power connector |
| 8. | J_PS1 | PSU 2 power connector |
| 9. | J_IDSDM | Internal dual SD module connector |
| 10. | J_NDC | Network daughter card connector |
| 11. | J_USB | USB port |
| 12. | J_VIDEO_REAR | Video connector |
| 13. | J_COM1 | Serial connector |
| 14. | J_IDRAC_RJ45 | iDRAC7 connector |
| 15. | J_CYC | System identification connector |
| 16. | CYC_ID | System identification button |
| 17. | J_TPM_MODULE | Trusted Platform Module connector |
| 18. | J_RISER_2AX | Riser 2 connector |
| 19. | J_RISER_1AX | Riser 1 connector |
| 20. | J_RISER_2BX | Riser 2 connector |
| 21. | J_RISER_1BX | Riser 1 connector |
| 22. | J_RISER_3AX | Riser 3 connector |
| 23. | J_SATA_B | SATA connector |
| 24. | J_QS | Quick Sync connector |
| 25. | J_RISER_3BX | Riser 3 connector |
| 26. | J_USB_INT | Internal USB port |
| 27. | J_STORAGE | Storage controller card connector |
| 28. | J_SATA_A | SATA connector |
| 29. | BAT | Battery connector |
| 30. | CPU2 | Processor socket 2 |
| 31. | J_FAN1U_7 | Cooling fan connector |
| 32. | B1, B5, B9, B2, B6, B10 | Memory module sockets |
| 33. | J_BP3 | Hard drive backplane power connector |
| 34. | J_FAN1U_6 | Cooling fan connector |
| 35. | J_BP_SIG2 | Backplane signal connector 2 |
| 36. | J_FAN1U_5 | Cooling fan connector |
| 37. | J_BATT_SIG | Battery signal connector |
| 38. | J_FAN1U_4 | Cooling fan connector |
| 39. | A1, A5, A9, A2, A6, A10, B3, B7, B11, B4, B8, B12 | Memory module sockets |
| 40. | J_FAN1U_3 | Cooling fan connector |
| 41. | J_FAN2U | Cooling fan connector |
| 42. | J_FAN1U_2 | Cooling fan connector |
| 43. | A12, A8, A4, A7, A11, A3 | Memory module sockets |
| 44. | J_FAN1U_1 | Cooling fan connector |
| 45. | J_CTRL_PNL | Control panel connector |
| 46. | CPU1 | Processor socket 1 |
| 47. | J_FP_USB | Front panel USB port |
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\