Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

iDRAC 8/7 v2.70.70.70 RACADM CLI Guide

PDF

racdump

Table 1. Details of racdump attributeThe following table provides the details of racdump attribute:
Description Provides a single command to get dump, status, and general iDRACCMC board information.

This subcommand displays the comprehensive chassis status, configuration state information, and historic event logs. Used for post deployment configuration verification and during debugging sessions.

To run this subcommand, you must have the Administrator privilege.

To run this subcommand, you must have the Debug permission.

Racdump includes the following subsystems and aggregates the following RACADM commands:

  • General System/RAC Information
  • Coredump Information

  • Network Interface Statistics

  • Session Information

  • Process Information

  • RAC Firmware Build Log

  • General System/RAC information — getsysinfo
  • Session information — getssinfo
  • Sensor information — getsensorinfo
  • Switches information (IO Module) — getioinfo
  • Mezzanine card information (Daughter card) — getdcinfo
  • All modules information — getmodinfo
  • Power budget information — getpbinfo
  • KVM information — getkvminfo
  • NIC information (CMC module) — getniccfg
  • Redundancy information — getredundancymode
  • Trace log information — gettracelog
  • RAC event log — getraclog
  • System event log — getsel
Synopsis
racadm racdump
racadm racdump
Input N/A
Output
The following information is displayed when this subcommand is processed:
  • General system or RAC information
  • Coredump
  • Session information
  • Process information
  • Firmware build information

Example

===============================================================================
 General System/RAC Information
===============================================================================

RAC Information:
RAC Date/Time           = Thu Jul  3 13:35:32 2014

Firmware Version        = 2.05.05.05
Firmware Build          = 12
Last Firmware Update    = 07/02/2014 19:41:38
Hardware Version        = 0.01
MAC Address             = 18:03:73:F7:B7:CA

Common settings:
Register DNS RAC Name   = 0
DNS RAC Name            = idrac
Current DNS Domain      = 
Domain Name from DHCP   = Disabled

IPv4 settings:
Enabled                 = 1
Current IP Address      = 192.168.0.1
Current IP Gateway      = 192.168.0.1
Current IP Netmask      = 192.168.0.1
DHCP Enabled            = 0
Current DNS Server 1    = 0.0.0.0
Current DNS Server 2    = 0.0.0.0
DNS Servers from DHCP   = Disabled

IPv6 settings:
Enabled                 = 0
Current IP Address 1    = ::
Current IP Gateway      = ::
Autoconfig              = 1
Link Local IP Address   = ::
Current IP Address 2    = ::
Current IP Address 3    = ::
Current IP Address 4    = ::
Current IP Address 5    = ::
Current IP Address 6    = ::
Current IP Address 7    = ::
Current IP Address 8    = ::
Current IP Address 9    = ::
Current IP Address 10   = ::
Current IP Address 11   = ::
Current IP Address 12   = ::
Current IP Address 13   = ::
Current IP Address 14   = ::
Current IP Address 15   = ::
DNS Servers from DHCPv6 = Disabled
Current DNS Server 1    = ::
Current DNS Server 2    = ::

System Information:
System Model            = PowerEdge R720
System Revision         = I
System BIOS Version     = 2.0.18
Service Tag             = 
Express Svc Code        = 
Host Name               = localhost.localdomain
OS Name                 = 
OS Version              = 
Power Status            = ON
Fresh Air Capable       = No

Watchdog Information:
Recovery Action         = None
Present countdown value = 478 seconds
Initial countdown value = 480 seconds

Embedded NIC MAC Addresses:
NIC.Integrated.1-3-1    Ethernet                = 78:2B:CB:4B:C2:ED
NIC.Integrated.1-1-1    Ethernet                = 78:2B:CB:4B:C2:EB


===============================================================================
 Coredump Information
===============================================================================
There is no coredump currently available.

===============================================================================
 Network Interface Statistics
===============================================================================
Kernel IPv6 routing table
Destination                                 Next Hop                                Flags Metric Ref    Use Iface
::1/128                                     ::                                      U     0      1        1 lo      
::1/128                                     ::                                      U     256    0        0 lo      
fe80::1a03:73ff:fef7:b7ca/128               ::                                      U     0      0        1 lo      
fe80::/64                                   ::                                      U     256    0        0 eth1    
ff00::/8                                    ::                                      U     256    0        0 eth1    


Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
0.0.0.0         192.168.0.1     0.0.0.0         UG        0 0          0 bond0
192.168.0.1     0.0.0.0         192.168.0.1     U         0 0          0 bond0


Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address             Foreign Address           State       
tcp        0      0 192.168.0.1:53986         192.168.0.1:199           ESTABLISHED 
tcp        0      0 192.168.0.1:53985         192.168.0.1:199           ESTABLISHED 
tcp        0      0 192.168.0.1:199           192.168.0.1:53986         ESTABLISHED 
tcp        0      0 192.168.0.1:199           192.168.0.1:53985         ESTABLISHED 


===============================================================================
 Session Information
===============================================================================
No active sessions currently exist.

===============================================================================
 Process Information
===============================================================================
  PID USER       VSZ STAT COMMAND
    1 root      5236 S    {systemd} /sbin/init
    2 root         0 SW   [kthreadd]
    3 root         0 SW   [ksoftirqd/0]
    6 root         0 SW   [watchdog/0]
    7 root         0 SW<  [khelper]
    8 root         0 SW   [kdevtmpfs]
    9 root         0 SW<  [netns]
  153 root         0 SW   [sync_supers]
  155 root         0 SW   [bdi-default]
  157 root         0 SW<  [kblockd]
  166 root         0 SW   [khubd]
16233 root     40916 S    racadm racdump
16246 root      3824 S    sh -c /bin/ps
16247 root      3828 R    /bin/ps
26851 root         0 SW   [kworker/u:3]


===============================================================================
 RAC Firmware Build Log
===============================================================================
BLD_TAG=idracfw_bldtag_2.05.05.05_691231_1800_00
BLD_VERSION=2.05.05.05
BLD_NUMBER=69.12.31
BLD_DATE=2.00.00.00.733
BLD_TYPE=idrac
BLD_KERNEL=ZIMAGE
racadm racdump
===============================================================================
 General System/RAC Information
===============================================================================

CMC Information:
CMC Date/Time           = Wed, 28 Nov 2007 11:55:49 PM
Active CMC Version      = X08
Standby CMC Version     = N/A
Last Firmware Update    = Wed Nov 21 21:37:56 2007
Hardware Version        = 2
Current IP Address      = 192.168.0.1
Current IP Gateway      = 192.168.0.1
Current IP Netmask      = 192.168.0.1
DHCP Enabled            = 1
MAC Address             = 00:55:AB:39:10:0F
Current DNS Server 1    = 0.0.0.0
Current DNS Server 2    = 0.0.0.0
DNS Servers from DHCP   = 0
Register DNS CMC Name   = 0
DNS CMC Name            = cmc-servicetag
Current DNS Domain      =


Chassis Information:
System Model            = PowerEdgeM1000eControlPanel
System AssetTag         = 00000
Service Tag             =
Chassis Name            = Dell Rack System
Chassis Location        = [UNDEFINED]
Power Status            = ON

===============================================================================
 Session Information
===============================================================================

Type    User     IP Address      Login Date/Time
SSH     root     192.168.0.2     11/28/2007 23:40:53
KVM     root     169.254.31.30   11/28/2007 18:44:51


===============================================================================
 Sensor Information
===============================================================================

<senType> <Num> <sensorName> <status> <reading> <units> <lc>
<uc>
FanSpeed    1    Fan-1         OK      14495    rpm     7250 14500
FanSpeed    2    Fan-2         OK      14505    rpm     7250 14500
FanSpeed    3    Fan-3         OK       4839    rpm     2344 14500
FanSpeed    4    Fan-4         OK      14527    rpm     7250 14500
FanSpeed    5    Fan-5         OK      14505    rpm     7250 14500
FanSpeed    6    Fan-6         OK       4835    rpm     2344 14500
FanSpeed    7    Fan-7         OK      14521    rpm     7250 14500
FanSpeed    8    Fan-8       Not OK        1    rpm     7250 14500
FanSpeed    9    Fan-9         OK       4826    rpm     2344 14500

<senType> <Num> <sensorName> <status> <reading> <units> <lc>
<uc>
Temp        1   Ambient_Temp    OK       21     celcius  N/A  40

<senType> <Num>  <sensorName>  <status>   <AC-OK status>
PWR         1       PS-1        Online          OK
PWR         2       PS-2        Online          OK
PWR         3       PS-3        Online          OK
PWR         4       PS-4       Slot Empty       N/A
PWR         5       PS-5        Failed          OK
PWR         6       PS-6        Slot Empty      N/A 

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\