Dell OpenManage Enterprise-Modular Edition Version 2.00.00 for PowerEdge MX7000 Chassis User's Guide

Checking compliance

1. On the Firmware Compliance page, select the baseline and click Check Compliance.
   A summary of the compliance check is displayed on the right side of the Firmware Compliance page.
2. Click View Report.
   The Compliance Report page is displayed.

   You can see the details:

   • Device Compliance
   • Component Compliance
   • Type
   • Model
   • Device Name Contains
   • Component Contains
   • Service Tag Contains
   • Reboot Required
   • Prerequisites
   • Impact Assessment
   • Current Version Contains
   • Baseline Version Contains

   NOTE: If the firmware DUP is not available in the catalog, an error message is displayed.

   NOTE: Firmware downgrade for network IOMs is not supported from OME-M using DUP. For more information, see the OpenManage Enterprise-Modular Edition for PowerEdge MX7000 Chassis User's Guide or OS10 Enterprise Edition User Guide.

   The compliance status can be of types:

   • Unknown—The firmware version for the component or device is not available in the catalog.
   • Critical—The firmware version on the device is older than the catalog firmware version and the status of the firmware update in the catalog is critical or urgent.
   • Warning—The firmware version on the device is older than the catalog firmware version and the status of the firmware update in the catalog is critical.
   • Downgrade—The firmware version on the device is later than the catalog firmware version.
   • Ok—The firmware version on the device and the catalog firmware version are identical.

   You can perform the following tasks on the Compliance Report page:

   • Make Compliant— Updates the firmware for the selected device or component within a bundle.
   • Export — Exports the compliance report in .csv format to the specified location.
   • Advanced Filters—Sorts the device information.

   When you update the firmware for SAS IOMs that are available as an individual component and a chassis component, using the compliance report method, the management module update fails. Select the SAS IOM from the chassis component or the SAS IOM listed individually in the compliance report.

3. Click Prerequisitesto view the prerequisites and dependency requirements to perform firmware update
   • Prerequisites—displays the actions pending before performing the firmware update.
   • Dependency Requirements—displays the link to download the required DUP. Dependencies can be classified in to:
     • Intradependency—displays the sequential update order for the device or component according to the firmware update matrix.
     • Interdependency—displays a dependency between two distinct components or devices.