Dell OpenManage Enterprise-Modular Edition Version 2.00.00 for PowerEdge MX7000 Chassis User's Guide

Assigning Profile

1. On the Profiles page, select a profile and click Assign.
   The Deploy Profile wizard is displayed.
2. On the Details tab, verify the details and click Next.
   The Target tab is displayed.
3. Select Attach to Slots or Deploy to Devices and click Select Slots.
   The Select Device wizard is displayed.
4. Select the device from All Devices, click Finish and then click Next.
   The Boot to Network ISO tab is displayed.
5. Select Boot to Network ISO and enter the following file share information and click Next.
   • Share Type—Select CIFS or NFS as required.
   • ISO Information—Enter the ISO path.
   • Share Information—Enter the Share IP Address, Workgroup, Username, and Password.
   • Time to Attach ISO—Select the time duration to attach ISO from the dropdown.
   • Test Connection—Displays the test connection status.
   The iDRAC Management IP tab is displayed.
6. Select Target IP setiings and click Next. The available options are:
   • Don't change IP settings—No changes are made.
   • Set as DHCP—Select Enable IPv4 or Enable IPv6.
   • Set as static IP—Select Enable IPv4 or Enable IPv6 and enter the corresponding details.
   The Target Attributes tab is displayed.
7. Select Target Attributes components and click Next. The available options are:
   • BIOS
   • FC
   • System
   • NIC
   • iDRAC
   The Virtual Identities tab is displayed.
8. View Virtual Identity Pool information and click Next.
   The Schedule tab is displayed.
9. Select Schedule option from the following:
   • Run Now—Select this option to deploy the profile to the server immediately.
   • Enable Schedule—Select this option to select the date and time for the profile deployment.
   NOTE: The Enable Schedule option is disabled for slot-based profile deployment.
   NOTE: When you select Enable Schedule, the profile deployment runs at the scheduled time, even if you have already performed Run Now before the schedule. The Deploy Profile job fails when it is run at the scheduled time and an error message is displayed.
10. Click Finish.