Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell PowerEdge C6320p Owner's Manual

PDF

Removing the 1.8-inch solid state drive carrier

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.
  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
  3. Remove the sled from the enclosure.
  4. Remove the 1.8-inch solid state drive (SSD).
  5. Keep the Phillips #2 screwdriver ready.

Steps

  1. Using the Phillips screwdriver, loosen the two captive screws that secure the SSD carrier to the sled.
  2. Lift the SSD carrier away from the sled.
    Figure 1. Removing the 1.8-inch SSD carrier
    This image shows removing the 1.8-inch SSD carrier

Next steps

  1. Install the 1.8-inch SSD carrier.
  2. Install the SSD into the carrier.
  3. Install the sled into the enclosure.
  4. Follow the procedure listed in the After working inside your system section.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\