Dell PowerProtect Data Manager Appliance 5.13.0.0 Administrator Guide for DM5500

Add a protection policy for self-service File System protection

With self-service protection, the agent or host controls the primary backup process and PowerProtect Data Manager Appliance manages other aspects of the protection process. The process of adding a protection policy is similar for all policy types. However, these instructions contain only elements and options that appear when you select the self-service protection policy type.

1. Select Protection > Protection Policies.
   The Protection Policy window appears.
2. Click Add.
   The Add Policy window appears.
3. In the Type page, specify the new protection policies group fields. For example, if you are creating a protection policy for daily backups in the Windows server:
   1. In the Name field, specify the name of the protection policy. For example, File System Prod.
   2. In the Description field, specify a short description of the protection policy. For example, File System Prod Daily Backups
   3. In the Type field, select File System.
   4. Click Next.
      The Purpose page appears.
4. To create local backup protection, click Self-Service Protection.
5. Click Next.
   The Assets page appears.
6. Select the unprotected assets that you want to add to the backup of this protection policy group. The window enables you to filter by asset name to locate the required assets.
   You can use to switch between a list view of all assets discovered by PowerProtect Data Manager Appliance and a hierarchical view to display the assets in a tree structure underneath each host. A hierarchical view can be helpful if you have added multiple file systems and need to more easily identify which assets belong to which host.
7. On the Objectives page, select a policy-level Service Level Agreement (SLA) from the Set Policy Level SLA list, or select Add to open the Add Service Level Agreement wizard and create a policy-level SLA.
   The PowerProtect Data Manager Appliance Administration and User Guide provides instructions.
8. Click Add under Primary Retention.
   The Add Primary Retention dialog appears.
9. In the Retentions (Self Service) pane, specify the retention period.

   By default, all backup types have the same retention period. Changing the retention periods for specific backup types requires File System agent 19.9 or later. To change the retention periods for specific backup types, clear Set the same retention time for all backup types and change the Retain <backup_type> For field values as required.

   Self-service retentions created with older versions of the File System agent continue to use the same retention period for full and synthetic full backups.

10. On the Target pane of the Add Primary Retention dialog, specify the following fields:
    1. Storage Name—Select a backup destination from the list of existing protection storage systems, or select Add to add Protection Storage and complete the details in the Storage Target window.
       NOTE: The Space field indicates the total amount of space, and the percentage of available space, on the protection storage system.
    2. Storage Unit—Select New if this protection policy should use a new storage unit on the selected protection storage system, or select an existing storage unit from the list. Hover over a storage unit to view the full name and statistics for available capacity and total capacity, for example, testvmpolicy-ppdm-daily-123ab (300 GB/1 TB)
       When you select New, a new storage unit in the format policy namehost nameunique identifier is created at policy completion. For example, testvmpolicy-ppdm-daily-123cd.
    3. Network Interface—Select a network interface from the list, if applicable.
    4. Retention Lock—Move the Retention Lock slider to the right to enable retention locking for these backups.
       The retention lock mode setting comes from the configuration of the selected storage unit. When you enable retention locking, the Retention Lock Mode field displays the corresponding storage unit setting.

       Setting a retention lock applies to the current backup copy only, and does not impact the retention lock setting for existing backup copies.

       NOTE: Primary backups are assigned a default retention lock period of 14 days. Replicated backups, however, are not assigned a default retention lock period. If you enable Retention Lock for a replicated backup, ensure that you set the Retain for field in the Add Replication dialog to a minimum number of 14 days so that the replicated backup does not expire before the primary backup.
    5. SLA—From the list, select an existing service level agreement that you want to apply to this objective, or select Add to create an SLA within the Add Service Level Agreement wizard.
       The PowerProtect Data Manager Appliance Administration and User Guide provides instructions.
11. Click Save to save your changes and return to the Objectives page.

    The Objectives page updates to display the name and location of the target protection storage system under Primary Retention.

    After completing the objective, you can change any details by clicking Edit next to the objective.

12. Optionally, extend the retention period for a primary retention:
    1. Click Extend Retention next to Primary Retention.
       An entry for Extend Retention is created below Primary Retention.
    2. Under Extend Retention, click Add.
       The Add Extended Retention dialog appears.
    3. Extend the retention of a full primary backup copy every—Specify the preferred recurrence for the extended retention backup objective.
    4. Repeat on—Depending on the frequency of the full backup schedule, specify the day of the week, the date of the month, or the date of the year that the extended retention backup occurs.
    5. Retain For—Specify the retention period for the backup. You can retain an extended retention backup for a maximum of 70 years.
    6. Click Save to save your changes and return to the Objectives page.
13. Optionally, replicate the backups:
    NOTE:

    To enable replication, ensure that you add remote Protection Storage as the replication location. The PowerProtect Data Manager Appliance Administrator Guide provides detailed instructions about adding remote Protection Storage.

    When creating multiple replicas for the same protection policy, it is recommended to select a different storage system for each copy. If you select a storage unit that is the target of another objective for the same policy, the UI issues a warning. The PowerProtect Data Manager Appliance Administrator Guide provides information about replicating to shared Protection Storage to support PowerProtect Cyber Recovery. Verify the storage targets and the use case before you continue.

    When you create a replication objective, you can specify either scheduled replication or replication after backup completion.

    1. Under Replicate, click Add.
       The Add Replication dialog appears, with information in the left pane for each schedule that has been added for the primary backup objective of this protection policy.

       NOTE: Backups for all of the listed schedules will be replicated. You cannot select individual schedules for replication.
    2. Select a storage target:
       • Storage Name—Select a destination from the list of Protection Storage.
       • Storage Unit—Select an existing storage unit on the protection storage system. Or, select New to automatically create a storage unit.
       • Network Interface—Select a network interface from the list, if applicable.

       • Retention Lock—Move the Retention Lock slider to the right to enable retention locking for these backups.

         The retention lock mode setting comes from the configuration of the selected storage unit. When you enable retention locking, the Retention Lock Mode field displays the corresponding storage unit setting.

       • SLA—Select an existing replication service level agreement that you want to apply to this schedule from the list. Or, select Add to create a replication SLA within the Add Service Level Agreement wizard.

       The PowerProtect Data Manager Appliance Administrator Guide provides more information about replication targets, such as SLAs.

    3. Select when to replicate the backups:

       Replication triggers provides more information.

       • To replicate after the backup finishes, move the Replicate immediately upon backup completion slider to on.

       • For scheduled replication, move the Replicate immediately upon backup completion slider to off, and then complete the schedule details in the Add Replication dialog.

         For replication of the primary backup, the schedule frequency can be every day, week, month, or x hours.

         For daily, weekly, and monthly schedules, the numeric value cannot be modified. For hourly, however, you can edit the numeric value. For example, if you set Create a Full backup every 4 hours, you can set a value of anywhere from 1 to 12 hours.

       By default, all replicas of the primary backup objective inherit the retention period from the Retain For value of the synthetic full and full backup schedules.

    4. To specify a different retention period for individual synthetic full and full replicas, clear Set the same retention time for all replicated copies, click Edit in the row of each schedule that you want to change, update the value in the Retain For field, and then click Save.
       CAUTION: Setting a retention period for the replicas of other backup types (such as log backups, incremental, and differential backups, where applicable) that is shorter than the retention period of the corresponding full backup may result in being unable to recover from those replicas.
    5. Click Save to save your changes and return to the Objectives page.
14. Optionally, to move backups from Protection Storage to Cloud Tier, add a Cloud objective for the primary or replication objective:
    NOTE: To move a backup or replica to Cloud Tier, objectives must have a retention time of 14 days or more. PowerProtect Data Manager Appliance also requires the discovery of Protection Storage with a configured Cloud unit.
    1. Click Cloud Tier next to Primary Retention. Or, if adding a Cloud objective for a replication objective that you have added, click Cloud Tier under Replicate.
       An entry for Cloud Tier is created to the right of the primary objective, or below the replication objective.
    2. Under the entry for Cloud Tier, click Add.
       The Add Cloud Tier Backup dialog appears, with summary information for the parent objective to indicate whether you are adding this Cloud Tierobjective for the primary objective or the replication objective.
    3. Keep the All applicable full backups slider to the right if you want to tier the backups from all of the full primary backup or replication schedules of this policy. Otherwise, move the slider to the left and select the full schedule(s) that you want to tier.
       NOTE: If the retention period of a schedule is less than the minimum 14 days required before tiering occurs, or is less than the value in the Tier After field, you can still select this schedule for tiering. However, if you do not edit the retention period of this schedule or its backup or replication copy to a value greater than the Tier After field before the retention period of the copy expires, the backup or replication copy of this schedule will not be cloud tiered.
    4. Complete the objective details in the Add Cloud Tier Backup dialog, and then click Save to save your changes and return to the Objectives page.
       The PowerProtect Data Manager Appliance Administration and User Guide provides detailed instructions for adding a Cloud objective for a primary or replication objective.
15. Click Next.
    The Options page appears.
16. On the Options page, select the additional option if required for the policy:
    • Enable indexing for file search and restore — Select this to perform search on the backups.
    • Troubleshooting — Select this option to enable the debug logs for troubleshooting at higher debug levels. To override the default debug level, add the statement debugLevel=<N> to the addOn.cfg configuration file, where N is the desired debug level, in the range [4..9].
      NOTE: Changing the default bug level can result in larger logs that can slow backup operations and sometimes cause the asset host to run out of disk space. On Windows hosts, the log files are located in the C:\Program Files\DPSAPPS\fsagent\tmp and C:\Program Files\DPSAPPS\fsagent\logs directories. On Linux hosts, the logs are located in the /opt/dpsapps/fsagent/tmp and /opt/dpsapps/fsagent/logs directories. If no backup jobs are running, files in these directories can be removed.

      In Windows environments, the impacted logs include:

      • FSAgentInstallPath\logs\vsscr.log
      • FSAgentInstallPath\logs\nsriscsi.log
      • FSAgentInstallPath\logs\nsriscsi_***.log
      • FSAgentInstallPath\logs\nsrwriter.log
      • FSAgentInstallPath\logs\ddfscon.***.log
      • FSAgentInstallPath\logs\ddfscon_***.log
      • FSAgentInstallPath\logs\ddfssv.log
      • FSAgentInstallPath\logs\ddfssv_***.log
      • FSAgentInstallPath\logs\ddfsrc_***.log

      In Linux environments, the impacted logs include:

      • /opt/dpsapps/fsagent/logs/nsriscsi.log
      • /opt/dpsapps/fsagent/logs/ddfscon.***.log
      • /opt/dpsapps/fsagent/logs/ddfssv.log

    NOTE: If you have updated from an earlier File System agent version, some log files may appear with both .log and .raw extensions. Use the .log files.
17. Click Next.
    The Summary page appears.
18. Review the protection policy group configuration details. You can click Edit next to any completed window's details to change any information. When completed, click Finish.
    An informational message appears to confirm that PowerProtect Data Manager Appliance has saved the protection policy.

    When the new protection policy is created and assets are added to the protection policy, PowerProtect Data Manager Appliance performs backups according to the backup schedule.

19. Click OK to exit the window, or click Go to Jobs to open the Jobs window to monitor the backup of the new protection policy group.

    You can monitor and view detailed information in the Jobs window for self-service backups and restores of database application agents.

    NOTE: The Cancel and Retry options are not available for self-service jobs that are created by database application agents.
    Upon requesting a backup (file-based or block-based), the status of the protection policy becomes Queued. This status switches to Running only after the system begins writing the backup to PowerProtect DD.