- Notes, cautions, and warnings
- Preface
- Prepare for hardware replacement
- DM5500 customer replaceable unit procedures
- Expansion enclosure customer replaceable unit procedures
Physical slot number in drive bay | Logical slot number displayed in UI alerts |
---|---|
0 | 1 |
1 | 2 |
2 | 3 |
3 | 4 |
4 | 5 |
5 | 6 |
6 | 7 |
7 | 8 |
8 | 9 |
9 | 10 |
10 | 11 |
11 | 12 |
12 | 13 |
13 | 14 |
14 | 15 |
15 | 16 |
16 | 17 |
17 | 18 |
18 | 19 |
19 | 20 |
20 | 21 |
21 | 22 |
22 | 23 |
23 | 24 |
The Remove Disk: <drive bay number>.<drive number> dialog appears.
In the dialog, click Remove.
This will initiate a data transfer from the failed disk to the remaining disks in the DM5500.
The disk status will change to Absent or Not Installed.
The Blinking LED light for Disk: <drive bay number>.<drive number> dialog appears, indicating that the LED light on the front of the drive in the server is blinking.
Physical drive slots are numbered 0 through 23 in the two drive bays, and there is an imprint at the bottom of each bay denoting the slot number, as shown in the following image.