Dell Precision 7920 Tower Owner's Manual

Removing the memory module

1. Follow the procedure in Before working inside your computer.
2. Remove the following:
   1. side cover
   2. air shroud
3. Press the memory module retention tabs on each side of the memory module.
4. Lift the memory module out of the memory slot on the system board.
   CAUTION:To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components or metallic contacts on the memory module as electrostatic discharge(ESD) can inflict severe damage on the components. To read more about ESD protection, see ESD protection.

   WARNING:Rotating the memory module out of the slot causes damage to the memory module. Ensure to pull it straight out of the memory module slot.