Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

OptiPlex All-in-One Plus 7410 Owner's Manual

Installing the graphics card

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

The following image(s) indicate the location of the graphics card and provides a visual representation of the installation procedure.

Installing the graphics card

Steps

  1. Place the graphics-card fan on the graphics-card shield.
  2. Align the screw holes on the graphics-card fan with the screw holes on the graphics-card shield.
  3. Replace the two screws (M3x5) that secure the graphics-card fan to the graphics-card shield.
  4. Place the graphics card on the graphics-card assembly.
  5. Align the screw holes on the graphics card with the screw holes on the graphics-card assembly.
  6. Loosen the four captive screws that secure the graphics card to the graphics-card assembly.
  7. Replace the two screws (M2.5x5) that secure the graphics card to the graphics-card assembly.
  8. Flip over the graphics-card assembly.
  9. Connect the graphics-card fan to the graphics card.
  10. Close the DGFX door and press it into place, securing it.
  11. Place the graphics-card assembly on the display-assembly base and slide the graphics card into the PCIe x16 connector (SLOT1 PCIe4 x4) on the system board.
  12. Replace the two screws (M3x5) that secure the graphics-card assembly to the display-assembly base.

Next steps

  1. Install the back cover.
  2. Install the stand.
  3. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\