OptiPlex All-in-One Plus 7410 Owner's Manual

Display

The following table lists the display specifications of your OptiPlex All-in-One Plus 7410.

Table 1. Display specifications
The following table provides the detailed display specifications of OptiPlex All-in-One Plus 7410.
Description		Option one	Option two
Display type		Full High Definition (FHD), ComfortView Plus	Full High Definition (FHD), ComfortView Plus
Touch options		No	Touch support, with 10 touch points
Display-panel technology		In-Plane Switching (IPS)	In-Plane Switching (IPS)
Display-panel dimensions (active area):
	Height	296.46 mm (11.67 in.)	296.46 mm (11.67 in.)
	Width	527.04 mm (20.75 in.)	527.04 mm (20.75 in.)
	Diagonal	604.70 mm (23.81 in.)	604.70 mm (23.81 in.)
Display-panel native resolution		1920 x 1080	1920 x 1080
Luminance (typical)		250 nits	300 nits
Megapixels		2.07	2.07
Color gamut		99% (sRGB)	99% (sRGB)
Pixels Per Inch (PPI)		92	92
Contrast ratio (minimum)		700:1, minimum 1000:1, typical	700:1, minimum 1000:1, typical
Response time (maximum)		25 ms, minimum 14 ms, typical	20 ms, minimum 14 ms, typical
Refresh rate		60 Hz	60 Hz
Horizontal view angle		+/- 85 degrees, minimum +/- 89 degrees, typical	+/- 85 degrees, minimum +/- 89 degrees, typical
Vertical view angle		+/- 85 degrees, minimum +/- 89 degrees, typical	+/- 85 degrees, minimum +/- 89 degrees, typical
Pixel pitch		0.27 mm	0.27 mm
Power consumption (maximum)		14.11 W	17.26 W
Anti-glare vs glossy finish		Anti-glare	Anti-glare