OptiPlex 7071 Tower Setup and specifications guide

Ports and connectors

Table 1. External ports and connectors
The following table lists ports and connectors available on OptiPlex 7071 Tower.
Description	Values
External:
Network	1 RJ-45 port 10/100/1000 Mbps (rear)
USB	1 USB 2.0 port with PowerShare (front) 1 USB 2.0 port (front) 2 USB 2.0 ports with Smart Power On (rear) 1 USB 3.1 Gen 2 Type-C port with PowerShare (front) 1 USB 3.1 Gen 1 port (front) 4 USB 3.1 Gen 1 ports (rear)
Audio	1 Universal audio jack (front) 1 Line-out audio jack (rear)
Video	2 DisplayPort v1.2 1 Optional 3^rd video port—HDMI 2.0, DP, VGA, or USB Type-C Alt mode)
Media card reader	1 SD 4.0 card—optional
Docking port	Not supported
Power adapter port	AC-in
Serial	1 port
PS/2	2 ports
Security	1 Kensington slot 1 Padlock loop
Antenna	2 SMA connectors—optional

Table 2. Internal ports and connectors
The following table lists ports and connectors available on OptiPlex 7071 Tower.
Description	Values
Internal:
Expansion	1 full-height Gen 3 PCIe x16 slot 1 full-height PCIe x16 (wired x4) slot 1 full-height PCI-32 slot 1 full-height PCIe x1 slot
SATA slots	4 SATA slots for 3.5-inch HDD, 2.5-inch HDD/SSD, and slim Optical Disk Drive (ODD)
M.2	1 M.2 2230 slot for WiFi 1 M.2 2230/2280 slot for solid-state drive or Intel Optane Memory 1 M.2 2230 slot for solid-state drive through media card reader NOTE: : To learn more about the features of different types of M.2 cards, see the knowledge base article SLN301626.