Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell OptiPlex 7070 Ultra Service Manual

System information

Table 1. System Configuration The following table describes the system configuration:
Option Description
Integrated NIC Allows you to configure the on-board LAN controller. The option Enable UEFI Network Stack is selected by default.
  • Disabled = The internal LAN is off and not visible to the operating system.
  • Enabled = The internal LAN is enabled.
  • Enabled w/PXE = The internal LAN is enabled (with PXE boot) (selected by default)
SATA Operation Allows you to configure the operating mode of the integrated hard drive controller.
  • Disabled = The SATA controllers are hidden
  • AHCI = SATA is configured for AHCI mode
  • RAID ON = SATA is configured to support RAID mode (selected by default)
Drives Allows you to enable or disable the various drives on-board:
  • SATA-1 (enabled by default)
  • SATA-2 (enabled by default)
  • M.2 PCIe SSD-0 (enabled by default)
Smart Reporting This field controls whether hard drive errors for integrated drives are reported during system startup. The Enable Smart Reporting option is disabled by default.
USB Configuration Allows you to enable or disable the integrated USB controller for:
  • Enable USB Boot Support
  • Enable Side USB Port
  • Enable Rear USB Port

All the options are enabled by default.

Rear USB Configuration Allows you to enable or disable Rear USB ports.
  • Rear Port 1 (Left)
  • Rear Port 2 (Right)
  • Rear Type-C Port
Side USB Configuration Allows you to enable or disable Side USB ports.
  • Side Port 1 w/PowerShare (Bottom)
  • Side Type-C Port
USB PowerShare

This option configures the USB PowerShare feature behavior.

  • Enable USB PowerShare - disabled by default.

This feature is intended to enable users to power or charge external devices, such as phones and portable music players, using the stored system battery power through the USN PowerShare port on the notebook, while the notebook is in a sleep state.

Audio Allows you to enable or disable the integrated audio controller. The option Enable Audio is selected by default.

Both the options are selected by default.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\