OptiPlex Tower Plus 7020 Owner's Manual

Installing the wireless card

About this task

The following images indicate the location of the wireless card and provide a visual representation of the installation procedure.

1. Connect the wireless-antenna cables to the wireless card.

   Table 1. Antenna-cable color schemeThe table provides the antenna-cable color scheme for the wireless card:

   Connectors on the wireless card	Antenna-cable color	Silkscreen marking
   Main	White	MAIN	△ (white triangle)
   Auxiliary	Black	AUX	▲ (black triangle)

2. Align and place the wireless-card bracket over the antenna cables to secure them.
3. Align the notch on the wireless card with the tab on the wireless-card slot (M.2 WLAN) on the system board.
4. Slide the wireless card at an angle into the wireless-card slot on the system board.
5. Replace the screw (M2x3.5) to secure the wireless-card to the system board.