OptiPlex Tower Plus 7020 Owner's Manual

Installing the secondary 3.5-inch hard drive

About this task

The following images indicate the location of the secondary 3.5-inch hard drive and provide a visual representation of the installation procedure.

1. Align and insert the secondary 3.5-inch hard drive into the hard-drive bracket.
2. Align the screw holes on the 3.5-inch hard-drive bracket to the holes on the hard drive.
3. Replace the fours screws (#6-32) to secure the secondary 3.5-inch hard-drive to the hard-drive bracket.
4. Align and place the secondary 3.5-inch hard-drive assembly in the hard-drive slot on the chassis.
5. Replace the screw (#6-32) to secure the secondary 3.5-inch hard-drive assembly to the chassis.
6. Connect the data and power cables to the respective connectors on the secondary 3.5-inch hard drive.
7. Route the data and power cables through the retention clips on the secondary 3.5-inch hard drive assembly.