OptiPlex Tower Plus 7020 Owner's Manual

Installing the memory module

About this task

The following image indicates the location of the memory and provides a visual representation of the installation procedure.

1. Ensure that the memory-module securing clips are in an open position.
2. Align the notch on the memory module with the tab on the memory-module slot (DIMM1, DIMM2, DIMM3 or DIMM4, whichever is applicable) .
3. Press down on the memory module until the memory module snaps in position and the securing clips lock in place.
   CAUTION:To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components or metallic contacts on the memory module as electrostatic discharge (ESD) can inflict severe damage on the components. To read more about ESD protection, see ESD protection.

   NOTE:If you do not hear the click, remove the memory module and reinstall it.
4. Repeat steps 1 to 3 to install the other memory modules in your computer, if applicable.