- Notes, cautions, and warnings
- Set up your Optiplex 5490
- Views of Optiplex 5490
- Specifications of Optiplex 5490
- Getting help and contacting Dell
The following table lists the power rating specifications of OptiPlex 5490 All-in-One.
Description | Values | |
---|---|---|
Type | 220 W Platinum | 155 W Bronze |
Diameter (connector) | Not supported | Not supported |
Input voltage | 90 VAC to 264 VAC | 90 VAC to 264 VAC |
Input frequency | 47 Hz to 63 Hz | 47 Hz to 63 Hz |
Input current (maximum) | 3.6 A | 3.6 A |
Output current (continuous) |
Standby mode:
|
Standby mode:
|
Rated output voltage |
|
|
BTUs/h (based on PSU max wattage) | 750 | 528 |
Typical Efficiency (Active PFC) |
Not applicable NOTE The typical efficiency of Active PFC Power Supply is 70%. APFC Power Supply is not offered with OptiPlex 5490 AIO.
|
|
Temperature range | ||
Operating | 5°C to 42°C (41°F to 107°F) | 5°C to 42°C (41°F to 107°F) |
Storage | -40°C to 70°C (-40°F to 158°F) | -40°C to 70°C (-40°F to 158°F) |
Compliance | ||
ErP Lot6 Tier 2 0.5 Watt requirement | Yes | Yes |
Climate Savers/80Plus compliant | Yes | Yes |
Energy Star 8.0 qualified | Yes | Yes |
FEMP Standby Power Compliant | Yes | Yes |