Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

OptiPlex 5400 Service Manual

PDF

Removing the camera assembly

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the stand.
  3. Remove the cable cover (optional).
  4. Remove the back cover.
  5. Remove the system-board shield.

About this task

The following image indicates the location of the camera assembly and provides a visual representation of the removal procedure.

Image: Removing the camera assembly

Steps

  1. Remove the two screws (M3x5) that secure the camera-assembly door to the display-assembly base.
  2. Disconnect the camera cable from the connector on the system board.
  3. Remove the two screws (M3x5) that secure the camera assembly to the middle frame.
  4. Slide and remove the camera assembly from the middle frame.
  5. Unroute the camera cable from the routing guides on the display-assembly base.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\