Dell OptiPlex 5080 Small Form Factor Cable Cover User Guide

Dell OptiPlex Small Form Factor Cable Cover

The cable cover for the Dell OptiPlex Small Form Factor system helps protect the ports and cables that are connected to the system.

1. Route the cables through the slot at the bottom of the cable cover.
2. Draw out the cables from the other side of the cable cover.
   
3. Connect the cables to their respective ports and turn the antenna (if available/applicable) outwards to pass through the antenna slot at the top of the cable cover.
   
4. Align the cable cover retaining hooks into their slots on the Dell OptiPlex Small Form Factor chassis.
   CAUTION: Take care not to bend or break the delicate plastic hooks.

   
5. Gently press down on the cable cover until it clicks into place.
6. Slide the latch to lock the cable cover in place.
   
   NOTE: For added security, use the Noble Wedge slot to secure the system.