Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell OpenManage Software Version 11.0.1.0 Support Matrix

PDF

Supported Integrated Dell Remote Access Controllers and solutions

The PowerEdge embedded server management solution, Integrated Dell Remote Access Controller (iDRAC) with Lifecycle Controller, helps IT administrators to speed up the essential management tasks, it increases the availability of your servers, and reduces your IT operational expenses.

With powerful, easy-to-use, remote management and configuration options, iDRAC with Lifecycle Controller alerts IT administrators when an issue occurs, enables streamlined local and remote server management, and reduces or eliminates the need for administrators to physically go to the server even if the server is not operational.

iDRAC includes the following:

  • Graphical User Interface(GUI), Command-Line Interface(CLI), and WS-Man
  • Server instrumentation
  • Operating system Integration
  • Manage storage devices.

Overview

All versions of iDRAC9 including Basic, Express, and Enterprise which ship from the factory with a default static IP address. This is a preferred and a known method. However, Dell Technologies also offers two options to better fit into an existing environment of the customer. Auto-discovery or DHCP can be set from the factory to enable you to access iDRAC and remotely configure your server.

iDRAC9 Management Traffic – Dedicated NIC or Shared LOM

For certain PowerEdge servers, you have the option to choose the network interface they want to route iDRAC traffic – either the default Dedicated NIC for the iDRAC itself or through the Shared LOM that is also used by the server. Dell Technologies recommends placing the iDRAC on a separate management network for best iDRAC security. However, you can also route iDRAC management traffic over the shared LOM. Select the Shared LOM option if you want to ensure that this feature is enabled at the Dell Technologies factory. There is no additional charge to enable Shared LOM at the time of order. The servers which support the option of selecting shared LOM for iDRAC management traffic are the following:

  • R740
  • R740xd
  • T640
  • R940
  • C6420

DRAC also logs event data and the most recent crash screen for systems running only the Microsoft Windows operating system to help diagnose the probable cause of a system crash.

For more information, see the Dell Remote Access Controller User's Guide or the Integrated Dell Remote Access Controller User's Guide on the Dell Support site.

The below table Supported Remote Access Controllers and solutions for blade, rack, and tower servers lists the following:

  • Supported Remote Access Controller versions and firmware for iDRAC
  • Supported Chassis Management Controller versions and firmware
  • Supported Baseboard Management Controller (BMC) firmware versions
  • Supported IPMI protocol versions

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\