The CIM_PowerSupply class described in Table below contains devices that provide current
and voltage for the operation of the system and its components
The following table describes the properties and data type of
the CIM Power Supply CLASS.
Class Name:CIM_PowerSupply
Parent Class:CIM_LogicalDevice
Table 1. CIM_PowerSupply
PropertiesThe following table describes the properties and data type of
the CIM Power Supply CLASS.
Property
Description
Data Type
IsSwitchingSupply
Indicates that the power supply is a switching
power supply and not a linear power supply.
Boolean
Range1InputVoltageLow
Indicates the low voltage in millivolts of input
voltage range 1 for this power supply. A value of 0 denotes unknown.
uint32
Range1InputVoltageHigh
Indicates the high voltage in millivolts of input
voltage range 1 for this power supply. A value of 0 denotes unknown.
uint32
ActiveInputVoltage
Indicates which input voltage range is currently
in use. Range 1, range 2, or both can be specified using the values
3, 4, or 5, respectively. If the supply is not drawing power, a value
of 6 (neither) can be specified. This information is necessary in
the case of an uninterruptible power supply (UPS), a subclass of power
supply. Values for the ActiveInputVoltage property are:
1— Other
2 — Unknown
3 — Range 1
4 — Range 2
5 — Both range 1 and range
2
6 — Neither range 1 nor
range 2
uint16
TotalOutputPower
Defines the maximum sustained output wattage of
the power supply (in tenths of Watts) 0 denotes 'unknown'.
uint32
InputRatedPower
Defines the rated input wattage of the power supply (in tenths of Watts).
uint32
PMCapable
Indicates the Power Monitoring capability.
Boolean
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\