Identifies the current state of the array disk.
Possible states:
0: Unknown
1: Ready - Available for use, but no RAID configuration
has been assigned.
2: Failed - Not operational.
3: Online - Operational. RAID configuration has been
assigned.
4: Offline - The drive is not available
to the RAID controller.
6: Degraded - Refers to
a fault-tolerant array/virtual disk that has a failed disk.
7: Recovering - Refers to state of recovering from bad
blocks on disks.
11: Removed - Indicates that array
disk has been removed.
13: Non-RAID - Indicates
that array disk is not a RAID capable disk.
14:
Not Ready - Applicable for PCIeSSD devices indicating that the device
is in locked state.
15: Resynching - Indicates
one of the following types of disk operations: Transform Type, Reconfiguration,
and Check Consistency.
22: Replacing - Indicates
copyback operation is in progress.
24: Rebuild
25: No Media - CD-ROM or removable disk has no media.
26: Formatting - In the process of formatting.
28: Diagnostics - Diagnostics are running.
34: Predictive Failure
35: Initializing:
Applies only to virtual disks on PERC, PERC 2/SC, and PERC 2/DC controllers.
39: Foreign
40: Clear
41: Unsupported
53: Incompatible
56: Read Only - Applicable for PCIeSSD devices. Indicates
that device has reached read-only state.
|