Dell EMC OpenManage SNMP Reference Guide Version 9.2

PDF

Power Supply Table

This table describes available properties for each power supply on the managed system.

The following object sets up the Power Supply Table.

Table 1. Power Supply Table . The following table describes the name, object ID, description, syntax, and access level.
Name	`powerSupplyTable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.9
Description	Defines the power supply table.
Syntax	SEQUENCE OF PowerSupplyEntry
Access	Not accessible

Table 2. Power Supply Entry . The following table describes the name, object ID, description, syntax, and access level.
Name	`powerSupplyEntry`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.9.1
Description	Defines the power supply table entry.
Syntax	PowerSupplyEntry
Access	Not accessible
Index	`powerSupplyNumber`

Table 3. Power Supply Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`powerSupplyNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.9.1.1
Description	Identifies the instance number of the power supply entry.
Syntax	Integer
Access	Read-only

Table 4. Power Supply Name . The following table describes the name, object ID, description, syntax, and access level.
Name	`powerSupplyName`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.9.1.2
Description	Identifies the power supply's name as represented in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 5. Power Supply Vendor . The following table describes the name, object ID, description, syntax, and access level.
Name	`powerSupplyVendor`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.9.1.3
Description	Identifies the power supply's (re)seller's name.
Syntax	DisplayString
Access	Read-only

Table 6. Power Supply State . The following table describes the name, object ID, description, syntax, and access level.
Name	`powerSupplyState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.9.1.4
Description	Identifies the current state of the power supply. Possible states: 0: Unknown 1: Ready 2: Failed 5: Not Installed 6: Degraded 11: Removed
Syntax	Integer
Access	Read-only

Table 7. Power Supply Severity . The following table describes the name, object ID, description, syntax, and access level.
Name	`powerSupplySeverity`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.9.1.5
Description	This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Syntax	Integer
Access	Read-only

Table 8. Power Supply 1 Part Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`powerSupply1PartNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.9.1.6
Description	Identifies the part number of the power supply of the enclosure.
Syntax	DisplayString
Access	Read-only

Table 9. Power Supply 2 Part Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`powerSupply2PartNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.9.1.7
Description	This entry is obsolete. This setting is not supported by power supplies managed under Storage Management
Syntax	DisplayString
Access	Read-only

Table 10. Power Supply Roll-Up Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`powerSupplyRollUpStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.9.1.8
Description	Severity of the power supply state. This is the combined status of the power supply and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 11. Power Supply Component Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`powerSupplyComponentStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.9.1.9
Description	Severity of the power supply state. This is the combined status of the power supply and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 12. Power Supply NexusID . The following table describes the name, object ID, description, syntax, and access level.
Name	`powerSupplyNexusID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.9.1.10
Description	Durable unique ID for this power supply.
Syntax	DisplayString
Access	Read-only

Table 13. Power Supply Revision . The following table describes the name, object ID, description, syntax, and access level.
Name	`powerSupplyRevision`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.9.1.11
Description	Indicates the revision number of the power supply in the enclosure.
Syntax	DisplayString
Access	Read-only