Dell EMC OpenManage Mobile Android Version 2.0.20 User’s Guide

Adding an iDRAC using Quick Sync 2

1. On the OpenManage Mobile home screen, tap on the top right corner.
   The Add screen is displayed.

   
   

   

   
   

2. Tap Server and click Next.
   The Add server screen is displayed.
3. Tap Add via Quick Sync 2 and click Next.
   A video on how to enable the bluetooth connection is displayed.
4. Click Next
   The bluetooth permission pop up message is displayed.
5. Tap Allow.

   NOTE: Go to Settings to enable the bluetooth.

   The BLE Device Scan screen is displayed.
6. Select the appropriate server and click next.
   The certificate acceptance screen is displayed.
7. Tap Yes to proceed.
   The iDRAC authentication screen is displayed.

   NOTE: To display the iDRAC authentication pop up, ensure the Read Authentication option is enabled in the server.

8. You can authenticate the iDRAC in one of the following ways:
   QR Scan:
   1. On the credentials page, Tap SCAN QR CODE.
      The camera access permission pop up message is displayed.
   2. The credential is auto populated. Tap Add Device.
      Position the camera to scan the QRL.

      NOTE: To enter the credentials manually or by using QR Scan, enable Read authentication on the server.

   Manual credentials:
   1. Tap ENTER MANUALLY.
   2. Enter the credentials to add the iDRAC.
   3. Tap Add iDRAC.