- Notes, cautions, and warnings
- Overview of OpenManage Integration with Microsoft Windows Admin Center
- Getting started with OpenManage Integration with Microsoft Windows Admin Center
- Ports required by Dell EMC OpenManage Integration with Microsoft Windows Admin Center
- Manage Dell EMC PowerEdge Servers
- Manage Failover clusters, Azure Stack HCI, and Windows Server HCI clusters
- View iDRAC details of the PowerEdge servers and nodes of HCI and Failover clusters
- Update PowerEdge servers and nodes of Windows Server HCI, Azure Stack HCI, and Failover clusters using OpenManage Integration extension
- Integrated deploy and update of Azure Stack HCI clusters
- Full Stack Cluster-Aware Updating for Azure Stack HCI clusters using OpenManage Integration snap-in
- Troubleshooting
- Identifying the generation of your Dell EMC PowerEdge server
- Contacting Dell EMC
- Glossary
- Appendix
Dell EMC OpenManage Integration Version 2.0 with Microsoft Windows Admin Center User’s Guide
View compliance report
The update compliance details are computed, and the compliance report is displayed. The bar chart represents the number of components in compliant, urgent, recommended, and optional states using color codes. The Compliance Report provides a detailed view of all the components that contains component name, current version, type, baseline version, compliance status, criticality, and compliance type.
You can click Expand all or Collapse all icon (available only for Cluster-Aware Update in OpenManage Integration extension) at the upper right of the Compliance Report pane to expand the nodes where you can select or deselect components. For more specific selection, you can select each color code present under the bar chart or use the search box to filter out the required components. Select clear at the upper right of the Compliance Report pane to remove the color code filter.
To analyze further, check the individual nodes in the Compliance Report to get the current version, baseline versions and compliance type of the components, and to view all the nodes and components in non-compliant, urgent, recommended, and optional states respectively. Along with compliance information, the license status (OMIWAC Premium License) for each node is also displayed.
NOTE All target nodes participating in the cluster must have valid licenses, otherwise, you cannot proceed to update the cluster. For more information about OMIMSWAC licensing, refer to
OMIMSWAC Installation Guide.
NOTE If a catalog does not contain updates to a component, then the component is not displayed in the generated compliance report.
| Attribute names | Description |
| Component Name | Specifies component name.
For example: Serial-ATA_Firmware_6FGD4_WN64_E012_A00 |
| Compliance | Specifies compliance type whether compliant or non-compliant.
|
| Criticality | Specifies whether compliance is urgent, recommended, or optional.
|
| Current Version | Specifies the current component version.
For example: E012 |
| Baseline Version | Specifies the version belongs to the imported catalog. For example: E013 |
| Type | Specifies the component type. For example: Firmware, BIOS, Driver, Application |
| Compliance Type | Specifies whether the component is Upgradable, Downgradable, or Same.
|
NOTE In the compliance report, the compliance type of
Microsoft basic display adapter Driver may show as downgradable. After you update (downgrade), the name of the driver will change to
Matrox G200eW3 (Nuvoton) WDDM <version no.> Driver. This an expected behavior.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\