Dell ObjectScale Application 1.3.x Installation Guide for Red Hat OpenShift

Download the charts .tgz and signature verification files from Dell Support

Download the files for the release of ObjectScale to install.

1. On a local Linux workstation create, and then open, a directory to place the downloaded files needed for the version of ObjectScale.
   1. Create a directory for the files for this version of ObjectScale:

      mkdir <DIR>

   2. Go to the directory:

      cd <DIR>

2. Open a browser and go the ObjectScale 1.3.0 Software Series page.
   1. Select your Model.
   2. Click the Drivers & Downloads tab for your ObjectScale model.
3. On the Drivers & Downloads tab for your model, filter the available files for your model by selecting a version. The list of available software for the selected ObjectScale model and version are shown.
4. Download the ObjectScale helm charts objectscale-helm-charts-1.3.0.tgz file to the directory you created on the local Linux workstation.
   This .tgz file contains all of the required helm charts for the release of ObjectScale.
5. Download the Dell Bare-Metal CSI Driver helm charts dellemc-csi-helm-charts-1.3.0-121.2e006fb.tgz file to the directory you created on the local Linux workstation.
   This .tgz file contains all of the required helm charts for the release of Dell Bare-Metal CSI Driver.
6. Download the files needed for online signature verification for this version to the directory you created on the local Linux workstation.
   • objectscale-online-image-digests-1.3.0.txt
   • objectscale-signatures-1.3.0.tgz
   • objectscale-signatures-1.3.0.tgz.signed.bin
   • objectscale-verify-online-digests-1.3.0.sh
   • obs-public-1.3.0.pem