Dell NetWorker 19.11 Licensing Guide

Install the license server (Linux 64-bit platform)

After you complete the NetWorker 19.11 installation, install the License Server from the 64-bit Linux package. For the license server package name for Linux, see table 9. If using a served license, the License Server is required for new and upgraded installations of NetWorker 19.11, even if you plan on using the traditional enabler-based licensing model. For more information about license server package for Linux, see table 9.

1. Download the Linux 64-bit installation package from the same location that you downloaded the NetWorker software from.
2. Log in to Linux as root or as a user with sudo privileges.
3. At the command prompt, type the following command to install the package, using the appropriate package version. For example:
   /opt/dellemc # rpm -v -i /tmp/dellemclicenseserver-3.6.x-x.x86_64_lsb.rpm
4. To confirm that the installation was successful perform the following steps:
   1. Type ls /opt/dellemc/licenseserver/
   2. In the directory listing output, verify that the following files were extracted:
      • EMCLM
      • lmgrd
      • lmutil
      • Readme.txt

      NOTE:After you install the License Server software on a Linux platform, the following error might appear: "-bash: ./lmgrd: No such file or directory". This error occurs because a library file is missing, typically the ld-lsb-x86-64.so.3 library file. If the library file does not exist on your system or, the incorrect version is installed, you must install the correct package. To verify which package the library file belongs to, you can run an rpm query if rpm packages are on your system. For example, type rpm -qf /lib64/ld-lsb-x86-64.so.3 lsb-4.0-22.3.1.x86_64. After you install the package that contains the required library file, the License Server should start.

      NOTE: It is recommended that you install the license server rpm using the root user account.