Mainframe Enablers TimeFinder SnapVX and zDP 8.5 Product Guide

PDF

EIPVDG_FLAGS flags

Table 1. EIPVDG_FLAGS flag valuesThe following table lists EIPVDG_FLAGS flags.
Field	Length	Type	Description
EIPVDG_CMD	1	Hex	Command flag: X’40’—CREATE X’20’—ECACLEAR X’10’—PAUSE X’08’—RELDLOK X’04’—DEBUG X’02’—STOP X’01’—START
EIPVDG_POLICY	1	Hex	Policy flag: X’04’—Terminate Stop X’02’—Terminate Least changed X’01’—Terminate Oldest
EIPVDG_DEBUG1	1	Hex	Debug flag 1: X’80’—DBG ERR X’40’—SRP X’20’—SAF X’10’—SNAP X’08’—STATUSE X’04’—STATUS X’02’—CONSDEV X’01’—CONS
EIPVDG_DEBUG2	1	Hex	Debug flag 2: X’40’—QUERY_05 X’20’—API_REQUEST X’10’—SYSCALL_IO X’08’—ACTIVATE_IO X’04’—CREATE_IO X’02’—TRIM_INPUT X’01’—TRIM_OUTPUT
EIPVDG_FLG1	1	Hex	Flag byte 1: X’80’—VDG definition X’40’—VDG stopped for cycle limit X’20’—VDG initialization complete X’10’—VDG initialization error X’08’—VDG has been paused X’04’—VDG updated by SCF EOM X’02’—VDG stopped with FORCE X’01’—VDG is active
EIPVDG_FLG2	1	Hex	Flag byte 2: X’80’—Error Email X’40’—SRP Email X’20’—Use ERREM for SRP warning X’10’—Continue after an AutoSwap X’08’—STOP if CONS Timeout X’04’—Consistent X’02’—SYSOUT option X’01’—CYCLE IMMED option
EIPVDG_FLG3	1	Hex	Flag byte 3: X'80'—Snapset Save X'40'—LOGREC for errors X'20'—SMF recording, include volumes X'10'—SMF recording X'08'—SMF exit X'04'—Create exit X'02'—Initialization exit X'01'—Automatic dynamic add/delete
EIPVDG_FLG4	1	Hex	Flag byte 4: X'80'—Bypass SRP utilization check X'40'—No ENQ X'20'—Active SRDF/A X'10'—Consistency within EIPZDP X'08'—Manage SnapVX by Sym X'04'—Lock while active X'02'—Lock during each cycle X'01'—Enable device locking
EIPVDG_FLG5	1	Hex	Flag byte 5: X'80'—SMF track counts X'40'—Bypass Term for Activate error X'20'—Bypass SRDF/A check X'10'—Bypass RDP metadata check X'08'—SNAP device ENQ X'04'—Fast Termination X'02'—Snapset count enabled X'01'—Multitasking enabled
EIPVDG_FLG6	1	Hex	Flag byte 6: X'80'—SECURE, Saved SS with Skip X'40'—SECURE, Saved SS X'20'—SECURE, with Skip X'10'—SECURE X'08'—SMF Volumes - Cycle X'04'—SMF Volumes - Initial X'02'—SMF Multitasking X'01'—SMF parameter update
EIPVDG_FLG7	1	Hex	Flag byte 7: X'80'—Scheduled snapset (always) X'40'—Dynamic change enabled X'20'—Initiate dynamic update X'10'—Fast LINK X'08'—Fast SnapVX supported X'04'—Legacy SnapVX X'02'—DECA supported X'01'—Legacy ECA
EIPVDG_FLG8	1	Hex	Flag byte 8: X'80'—Dyn_Ch(Y) after VDG restart X'40'—CO devs added dynamically X'20'—NOSORT option is ON X'10'—IMPORTed VDG
EIPVDG_FLG9	1	Hex	Flag byte 9
EIPVDG_FLG10	1	Hex	Flag byte 10
EIPVDG_FLG11	1	Hex	Flag byte 11
EIPVDG_FLG12	1	Hex	Flag byte 12: Initialization error code: 24—Device validation error 23—Start process timeout 22—DBG stg obtain failed 21—All devices are copy-once 20—No devices defined 19—Consistency error 18—RDP critical threshold 17—Snapset check error 16—Max Snapset check error 15—DLOK error 14—Refresh Dev info error 13—zDP not licensed 12—SnapVX CB build failed 11—ECA storage error 10—ECB storage error 9—DLOK storage error 8—SnapVX storage error 7—DEVS storage error 6—VDG storage error 5—ENQ failure 4—Version error 3—VDG not found 2—zDP token not found 1—Parameter list error