- Notes, Cautions, and Warnings
- Finding Information and Resources
- System Overview
- Quick Setup
- Removing and Installing Components
- Working on Your Computer
- Quick Disconnect (QD) Connector
- Specifications
- Contacting Dell
NOTE: : Before you begin any of the procedures in this section, read the safety information that shipped with your computer. For additional best practices information, see www.dell.com/regulatory_compliance
NOTE: : The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage.
CAUTION: : When you disconnect the AC adapter cable from the computer, grasp the connector, not the cable itself, and pull firmly but gently to avoid damaging the cable. When you wrap the AC adapter cable, ensure that you follow the angle of the connector on the AC adapter to avoid damaging the cable.
NOTE: : Some devices may not be included if you did not order them.
NOTE: : It is recommended that you turn on and shut down your computer at least once before you install any cards or connect the computer to a docking device or other external device, such as a printer.