Latitude 7530 Service Manual

Installing the main speakers

If you are replacing a component, remove the existing component before performing the installation procedure.

NOTE If the rubber grommets are pushed out when removing the main speakers, push them back in before replacing the main speakers.

The following image indicates the location of the main speakers and provides a visual representation of the installation procedure.

Image of installing the speakers

Using the alignment posts and rubber grommets, place the main speakers into the slots on the palm-rest and keyboard assembly.
NOTE Ensure that the alignment posts are threaded through the rubber grommets on the main speakers.
Route the main speaker cable along the bottom side of the palm-rest and keyboard assembly and the thermal fan. Then secure the main speaker cable into the routing guides on the palm-rest and keyboard assembly.
NOTE The main speaker cable must be routed through the routing guides to avoid damaging the speaker cable when installing the base cover.
Connect the main-speaker cable to the connector on the main-speaker daughter-board.