Latitude 7530 Service Manual

PDF

Screw list

NOTE When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE Screw color may vary with the configuration ordered.

Table 1. Screw listThe following table provides the different screws that are used in your Latitude 7530.
Component	Screw type	Quantity	Screw image
Base cover	Captive screws NOTE Screws are part of the base cover.	8
3-cell battery/4-cell battery	Captive screws	3
M.2 2230/2280 solid-state drive (SSD) thermal plate	M2x2	2
WWAN-card bracket	M2x2.5	1
Heat sink	M2x2.5	6
Display-cable bracket	M2x2	2
WLAN-antenna module bracket	M2x2	1
Darwin bracket	M2x2.5	1
Display-cable bracket	M2x2	2
Display hinges	M2.5x5	6
Audio daughter-board	M2x2.5	2
Main-speakers daughter-board	M2x2.5	2
Smart card reader	M2x2.5	4
Fingerprint reader bracket	M2x2.5	1
System board	M2x2.5 M2x3 M2x4	4/5 2 2
I/O daughter-board	M2x2.5 M2x4	1 2
Power button with optional fingerprint reader	M1.6x1.7	2
Keyboard assembly	M1.6x1.7	19/30
Keyboard	M2x2	2