Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Latitude 5590 Owners Manual

Removing the display panel

  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. base cover
    2. battery
    3. WWAN
    4. WLAN card
    5. hinge cap
    6. display assembly
    7. display bezel
  3. Remove the M2x3 screws (4) that secure the display panel to the display assembly [1] and lift to turn over the display panel to access the eDP cable [2].
    The image displays to remove the screws of display panel
  4. To remove the display panel:
    1. Peel off the adhesive tape [1].
    2. Lift the blue tape that secures the display cable [2].
    3. Lift the latch to disconnect the display cable from the connector on the display panel [3, 4].
    The image displays to remove the display panel

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\