- Notes, cautions, and warnings
- Set up your computer
- Create a USB recovery drive for Windows
- Chassis overview
- Keyboard shortcuts
- Specifications of Latitude 9410
- System setup
- Software
- Getting help
Option | Description |
---|---|
SATA Operation |
Allows you to configure the operating mode of the integrated SATA hard-drive controller. Click one of the following options:
|
Drives |
These fields let you enable or disable various drives on board. The options are:
|
SMART Reporting |
This field controls whether hard drive errors for integrated drives are reported during startup. The option is disabled by default. |
USB Configuration |
Allows you to enable or disable the internal/integrated USB configuration. The options are:
All the options are set by default. NOTE:USB keyboard and mouse always work in the BIOS setup irrespective of these settings.
|
Dell Type-C Dock Configuration |
Allows you to connect to Dell WD and TB family of docks (Type-C Docks) independent of USB and Thunderbolt adapter configuration. This option is enabled by default. |
Thunderbolt™ Adapter Configuration |
Allows you to enable or disable Thunderbolt options:
With following security levels :
|
Thunderbolt™ Auto Switch |
This option configures the method used by the Thunderbolt controller to perform PCIe device enumeration.
NOTE:A reboot is required for these changes to take effect.
|
USB PowerShare |
This option enables/disables the USB PowerShare feature behavior. This option is disabled by default. |
Audio |
Allows you to enable or disable the integrated audio controller. By default, the Enable Audio option is selected. The options are:
This option is set by default. |
Keyboard Illumination |
This field lets you choose the operating mode of the keyboard illumination feature.
|
Keyboard Backlight Timeout on AC |
This feature defines the timeout value for the keyboard backlight when an AC adapter is plugged into the system. Options are:
|
Keyboard Backlight Timeout on Battery |
This feature defines the timeout value for the keyboard backlight when the system is running only on battery power. Options are:
|
Touchscreen |
This option controls whether the touchscreen is enabled or disabled. This option is enabled by default. |
Unobtrusive Mode |
When enabled, pressing Fn+F7 will turn off all light and sound emissions in the system. Press Fn+F7 to resume normal operation. Default is Disabled. |
Fingerprint Reader |
Enable or disable the Fingerprint Reader or the Fingerprint Reader Device's Single Sign On capability.
|
Miscellaneous devices |
Allows you to enable or disable various on board devices.
|