Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude 14 Rugged Extreme – 7414 Owner's Manual

PDF

Removing the optical drive

  1. Follow the procedure in Before working inside your computer .
  2. Remove the:
    1. battery

    2. base cover

    3. docking board

  3. Unlock the optical drive bay press latch door and open it [1, 2].
  4. To disconnect the ExpressCard cables and the shroud cables:
    1. Lift the release tab and lift the cable out of the connector [3, 4].
    2. Remove the ExpressCard cable by lifting the cable out of the connector on the system board [5, 6].
    This figure shows how to open the press latch doors and disconnect the optical drive cables and ExpressCard cables.
  5. To remove the optical drive:
    1. Remove the screws that secure the optical drive to the system board [1].
    2. Slide the optical drive forward until the optical drive cable is visible [2].
    3. Lift the release tab [3] and lift the optical drive cable out of the connector on the system board [4].
    4. Slide the optical drive out of the optical drive slot on the computer [5].
    This figure shows how to remove the optical drive.
  6. To remove the optical drive connector:
    1. Remove the screw that secures the optical drive connector [1].
    2. Pull the optical drive connector [2].
    3. Remove the optical drive connector from the computer.
    This figure shows how to remove the optical drive connector

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\