Dell Latitude 14 Rugged Extreme – 7414 Owner's Manual

Removing the display assembly

Follow the procedure in Before working inside your computer .
Remove the:
To disconnect the cables:
1. Unroute the display cables and antenna cables from the routing channels .
2. Disconnect the antenna cables from the modules.
3. Remove the screws that secure the display connector cable cover to the system board [1].
4. Disconnect the display connector cable from the system board [2, 3].
5. Remove the screws to remove the hinge covers [4].
6. Lift the hinge covers and remove them to expose the display cable routing and the display hinges [5].
To remove the display hinges:
1. Unroute the display cables completely from the routing channels. [1].
2. Remove the screws that secure the display hinges to the computer [2].
3. Turn the computer over to continue with the display removal [3].
To remove the display assembly:
1. Open the display [1].
2. Lift the display panel from the hinges and remove it from the computer [2].