- Notes, cautions, and warnings
- Working on your computer
- Disassembly
and reassembly
- Recommended tools
- Screw list
- Subscriber Identity Module(SIM) board – optional
- SD card – optional
- Base cover
- Battery
- Solid state drive
- Hard drive
- Coin cell battery
- Memory modules
- WLAN card
- WWAN card – optional
- Chassis frame
- Fingerprint reader – optional
- Touchpad panel
- Heat sink assembly
- Keyboard lattice and Keyboard
- Power connector port
- LED board
- SmartCard module
- System board
- Speaker
- Display hinge cover
- Display assembly
- Display bezel
- Display panel
- Display (eDP) cable
- Camera
- Display hinges
- Display back cover assembly
- Palm rest
- Technical specifications
- System specifications
- Processor specifications
- Memory specifications
- Storage specifications
- Audio specifications
- Video specification
- Camera specifications
- Communication specifications
- Ports and connectors specifications
- Display specifications
- Keyboard specifications
- Touch pad specifications
- Battery specifications
- AC Adapter specifications
- Physical specifications
- Environmental specifications
- Technology and components
- Software
- System setup
options
- Boot Sequence
- Navigation keys
- System Setup overview
- Accessing System Setup
- General screen options
- System Configuration screen options
- Security screen options
- Secure Boot screen options
- Performance screen options
- Power Management screen options
- POST Behavior screen options
- Virtualization support screen options
- Wireless screen options
- Maintenance screen options
- Updating the BIOS in Windows
- Updating your system BIOS using a USB flash drive
- System and setup password
- Troubleshooting
Latitude 5495 Owner's Manual
System Configuration screen options
- Option
- Description
- Integrated NIC
- Allows you to configure the integrated network controller.
The options are:
- Disabled
- Enabled
- Enabled with PXE: This option is enabled by default.
- SATA Operation
- Allows you to configure the internal SATA hard-drive
controller. The options are:
- Disabled
- AHCI: This option is enabled by default.
- Drives
- Allows you to configure the drives on board. All drives
are enabled by default. The options are:
- SATA (default)
- M.2 PCIe SSD (default)
- SMART Reporting
- This field controls whether hard drive errors for
integrated drives are reported during system startup. This technology
is part of the SMART (Self Monitoring Analysis and Reporting Technology)
specification. This option is disabled by default.
- Enable SMART Reporting
- USB Configuration
-
This is an optional feature.
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any type of USB Mass Storage Devices (HDD, memory key, floppy).If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
- Enable USB Boot Support: This option is enabled by default.
- Enable External USB Port: This option is enabled by default.
- USB PowerShare
- This field configures the USB PowerShare feature behavior. This option allows you to charge external devices using the stored system battery power through the USB PowerShare port. The option "Enable USB Power Share" is not enabled by default.
- Touch Screen
- This option is enabled by default.
- Audio
- Keyboard Illumination
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\