Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Latitude 5495 Owner's Manual

PDF

Installing system board

  1. Align the system board with the screw holders on the computer.
    • NOTE: Insert the cables through the openings in the keyboard area while placing the system board in the computer.
  2. Replace the four (M2x3) screws to secure the system board to the system.
  3. Place the metal bracket to secure the DisplayPort over USB Type-C.
  4. Replace the 2 (M2x5) screws to secure the metal bracket on the DisplayPort over USB Type-C.
  5. Connect the power connector port cable to the connector on the system board.
  6. Connect the display cable to the connector on the system board and affix the tape that secures the display cable to the system.
  7. Place the display cable metal bracket over the display cable.
  8. Replace the two M2x3 screw s to secure the metal bracket.
  9. Flip over the system and open the system in working mode.
  10. Connect the following cables:
    1. Touchpad cable
    2. LED board cable
    3. USH board cable
    4. speaker cable
  11. Install the:
    1. heat sink assembly

    2. chassis frame

    3. keyboard

    4. keyboard lattice

    5. WWAN card (optional)

    6. WLAN card

    7. SSD frame

    8. SSD card

    9. hard drive

    10. memory module

    11. battery

    12. base cover

    13. SIM card

  12. Follow the procedure in After working inside your computer .

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\