Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell Latitude 5480 Owner's Manual

Removing battery

About this task

Steps

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. To remove the battery:
    1. Disconnect the battery cable from the connector on the system board [1].
    2. Remove the M2*6 captive screw that secures the battery to the computer [2].
      NOTE The number of screws will vary depending on the type of battery installed.
    3. Lift the battery from the computer [3].
      NOTE Discharge the battery as much as possible before removing from the system. This can be done by disconnecting the A/C adapter from the system (while the system is turned on) to allow the system to drain the battery.
    4. Unroute the cable from the routing channel [1] and remove the cable from the battery.
    Figure displaying how to remove the battery from the computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\