Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Latitude 5430 Rugged Service Manual

Installing the WWAN card

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the WWAN card and provides a visual representation of the installation procedure.

This image displays the replacing of WWAN card

Steps

  1. Slide the WWAN card at an angle into the WWAN card slot.
  2. Connect the antenna cables to the WWAN card.
    Table 1. Connectors on the WWAN card The following table provides the antenna-cable color scheme for the WWAN card for your laptop:
    Antenna Cable Color
    Main (white triangle) - ANT1 Orange (cable number 7)
    Main (white triangle) - ANT3 White and Black (cable number 6)
    Auxiliary (black triangle) - ANT0 White and Grey (cable number 5)
    Auxiliary (black triangle) - ANT2 Blue (cable number 8)
  3. Place the WWAN card holder on the WWAN card.
  4. Replace the (M2x3.5) screw that secures the WWAN card holder to the system board.
    NOTE:For instructions on how to find your computer's IMEI (International Mobile Station Equipment Identity) number, see the knowledge base article 000143678 at https://www.dell.com/support/.

Next steps

  1. Install the base cover.
  2. Install the primary M.2 2280 solid state drive or primary M.2 2230 solid state drive.
  3. Install the battery.
  4. Follow the procedure in after working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\