Dell Latitude 5411 Service Manual

1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the 2280 SATA SSD.
5. Remove the memory.
6. Remove the WLAN card.
7. Remove the WWAN card.
8. Remove the inner frame.
9. Remove the LED board.
10. Remove the DC-in.
11. Remove the system board.

    NOTE: System board can be removed with heatsink attached.

12. Remove the keyboard.
13. Remove the smart card reader.
14. Remove the display assembly.

After performing the preceding steps, you are left with the palmrest.

Palmrest without contactless smart card reader:

Palmrest with contactless smart card reader:

1. Install the display assembly.
2. Install the smart card reader.
3. Install the keyboard.
4. Install the system board.

   NOTE: System board can be installed with heatsink attached.

5. Install the DC-in.
6. Install the LED board.
7. Install the inner frame.
8. Install the memory.
9. Install the WLAN card.
10. Install the WWAN card.
11. Install the 2280 SATA SSD.
12. Install the battery.
13. Install the base cover.
14. Follow the procedure in After working inside your computer.