Latitude 7390 2-in-1 Owner's Manual

Installing the fingerprint reader board

1. Install the fingerprint reader board into the slot.
2. Place the fingerprint reader bracket on the board.
3. Replace 1(M2 x 3) screw to secure the bracket to the board.
4. Connect the fingerprint reader cable to the fingerprint reader board and the USH board.
5. Affix the coin cell battery on the speaker cable
6. Install the:
   1. Battery
   2. Base cover
   3. SIM card tray
   4. MicroSD card

      NOTE: : To install both cards if equipped.

7. Follow the procedure in After working inside your computer.