Latitude 7390 2-in-1 Owner's Manual

Removing the LED board

1. Follow the procedure in Before working inside your computer.
2. Remove:
   1. Micro SD
   2. SIM card tray

      NOTE: : To remove both cards if equipped and no need to remove the blank filler

   3. Base cover
   4. Battery
3. To remove the LED board:
   1. Disconnect the LED board cable from the LED board [1].
   2. Remove the tape that secures the LED board to the touchpad panel [2].
   3. Remove the 2 (M2 x 3) screws that secure the LED board on the computer [3].
   4. Lift the LED board from the computer [4].