Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Latitude 3380 Owner's Manual

Removing display bezel

NOTE The display bezel removal procedure is applicable only for nontouch systems.
  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. base cover
    2. battery
    3. WLAN card
    4. display assembly
  3. To remove the display bezel:
    1. Lift the display hinge cap from the display assembly .
      Figure displaying how to release and remove the display bezel.
    2. Loosen the three screws.
      Loosen the 3 screws.
    3. Loosen the four screws on the bezel.
      Loosen the 4 screws.
  4. Remove the display bezel from the display assembly.
    Remove the display bezel
    CAUTION The adhesive used on the LCD bezel to seal it with the LCD itself, pry at edges and work your way around to release the bezel. Seal can peel the layers up or crack the glass when trying to force pry the two items apart.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\